4
4.0
Mar 4, 2021
03/21
by
Ernest Epistola (Ernpao)
data
eye 4
favorite 0
comment 0
I based this on the Vortex Nitron's Scope, but not really an exact copy. I modeled it using an image of the side view of the actual scope, and an image of the front view to get an approximation of the physical dimensions. I broke down the scope into pieces for color separation, but also included a solid body .stl file for those who want to print it as a single piece.
Topics: nerf_attachment, nerf, nerf_sight, nerf_scope, thingiverse, nerf_accessories, stl, Hobby
5
5.0
Apr 20, 2021
04/21
by
Colin Davis (Colin_3D)
data
eye 5
favorite 0
comment 0
I have no idea what these little boogers are called but I keep losing them and really needed replacements for my Stryfes, so I made these. I'm not sure how many other Nerf blasters are compatible with em, but these work perfect for me.
Topics: nerf_stryfe, thingiverse, Nerf_Mod, stl, Nerf_gun, nerf_part, nerf, Nerf_Blaster, Replacement Parts
5
5.0
Mar 3, 2021
03/21
by
Samuel Xu (Flygonial)
data
eye 5
favorite 0
comment 0
A rail attachment for the Kronos slide, it intends to both improve upper slide ergonomics as well as provide an extra stopper for the hand. Tested only on a Worker 14kg spring, though it should handle higher spring loads within reason. Requires two M4x30mm screws, and two M4 hex nuts. F3D files included, though was not modeled particularly elegantly nor with much attention to keeping an optimal or well-labeled workflow. Updated with a version with a less exaggerated stopper for your hand. That...
Topics: kronos, Nerf_Blaster, nerf_kronos, nerf, thingiverse, nerf_modding, stl, Nerf_Mod, Hobby, Nerf_gun
3
3.0
Mar 8, 2021
03/21
by
Andrew Kane (KaneTheMediocre)
data
eye 3
favorite 0
comment 0
A 1.25" PVC mounted magazine system with an air-operated breech system that loads darts in response to pressure, and retracts in response to vacuum. It's currently on an O-ring HAMP, and has much optimizing yet to be done, but hypothetically this could attached to any air piston driven system of sufficient size.
Topics: nerf_katana_mag, nerf_gun, stl, thingiverse, nerf_homemade, homemade_nerf, nerf_katana,...
2
2.0
Jul 3, 2021
07/21
by
Nunya Business (Sillybutts)
data
eye 2
favorite 0
comment 0
THIS LISTING'S LINK IS BROKEN, THANKS THINGIVERSE! IT HAS BEEN REUPLOADED HERE: https://www.thingiverse.com/thing:4898355 A Raider magwell for the Talon Claw. This kit replaces the entire magwell area of the TC, as well as the foregrip and muzzle. I recommend you print this at 70-100% infill with Gyroid pattern and 4 or 5 walls. To secure the RaiderMagwell part to the RaiderFront part, you can either use a 4-40 screw or a takedown pin (or both if you feel like it). In theory, you can use this...
Topics: homemade_nerf, nerf_homemade, Mechanical Toys, nerf_raider, nerf_blaster, nerf_sidemag, nerf,...
5
5.0
Jan 19, 2021
01/21
by
wil mclaughlin (wilblitz)
data
eye 5
favorite 0
comment 0
EDIT: UPDATED WITH STEP FILES IF MORE AESTHETICALLY MINDED PEOPLE WANT TO REMIX Made a thumbhole foregrip roughly based on the Nerf Pyragon grip for picatinny rails. Specifically, this was for f10555 Retaliator grips. This is a longer version of the grip that I previously published. I haven't printed this myself but would probably like it more than the first one (tad too short) Essentially the same thing with the same rail dimensions. Can provide STEP files or whatever if y'all want them.
Topics: nerf, nerf_retaliator, nerf_grip, thingiverse, Sport & Outdoors, Nerf_gun, Nerf_Recon,...
6
6.0
Jan 16, 2021
01/21
by
Fox Colberg (Kal430Nerf)
data
eye 6
favorite 0
comment 0
Nerf magazine holder, easy to print. Excellent for carrying magazines upside down, and works surprisingly well. I printed it in PLA, your prints may vary. This was made in Tinkercad, so be aware of that.
Topics: nerf, nerf clip, nerf gun, nerf blaster, nerf molle, thingiverse, Sport & Outdoors, nerf belt,...
4
4.0
Mar 3, 2021
03/21
by
Ernest Epistola (Ernpao)
data
eye 4
favorite 0
comment 0
This is a Fusion 360 template for Stryfe cosmetic body kits. I mainly intended this template for beginners in CAD who are already comfortable with using Fusion 360 and who want to design their own cosmetic kits for the Stryfe. I hope the template can serve as a jumping-off point for awesome designs from others. Aside from here on Thingiverse, you can also download the .f3d template (and the documentation - most of the "technical" stuff about the template can be found there) from:...
Topics: Nerf_Blaster, nerf, nerf_stryfe, thingiverse, nerf_Cosmetic, stl, Nerf_Mod, Hobby
2
2.0
Oct 15, 2021
10/21
by
Caroline Leaves (beepbeepimajeep76)
data
eye 2
favorite 0
comment 0
A personal remix of ed_wolfe91's "Caliburn Takedown Transport Grease Covers", with a slight cut on one side of the rear cover to accommodate for Silly's Slamfire modifications. This file replaces the back cover only, so use the front cover included in ed_wolfe91's original fileset.
Topics: thingiverse, caliburn, nerfgun, nerf_slamfire, stl, nerf_homemade, Nerf_Blaster, Nerf_Mod,...
2
2.0
May 21, 2021
05/21
by
Victor Montgomery (TNMadrigal)
data
eye 2
favorite 0
comment 0
This is a nerf sight for picatiny rails. Picatiny rails can be either 3d printed or bought online. If you need picatiny rails, you can view my other listing for picatiny rails. This sight will not work on normal nerf guns. Please comment if you have any problems or thoughts to make it better.
Topics: Nerf_gun, Toys & Games, thingiverse, nerf scope, nerf sight, nerf gun sight, nerf picatiny,...
3
3.0
Apr 5, 2021
04/21
by
HUNTER HONKANEN (Hunter7777)
data
eye 3
favorite 0
comment 0
Nerf rival knockout holder V2! Print this with sight flat on base. Everything works great for me, let me know if there are any issues. This holds 4 rival balls has a sight and attaches to any nerf rival rail although it is most useful for the knockout (it is the only single fire reload rival blaster) If someone has issues with the balls staying in add a comment and i will work on another file that will help the balls stay better (this was not an issue for me) Happy Printing!
Topics: thingiverse, nerf_scope, knockout, nerf_attachment, Nerf_Rival, Toy & Game Accessories, stl,...
1
1.0
Jul 22, 2021
07/21
by
Nunya Business (Sillybutts)
data
eye 1
favorite 0
comment 0
After 4 months of development, I present: The Caliburn Slamfire kit! (Also known as the Slamfire is Much Preferred kit, or SIMP kit (thanks for that name Slug)) This is a kit that replaces the StockAlt, MagUpper, and top rail of the Caliburn. In turn, it gives you slamfire! **The kit does NOT modify the existing grip, trigger, or sear of the blaster.** This kit works with any spring load from k31 to k14. Just good luck slamfiring a k14! Non-printed parts: - 3 4-40 screws (2 and a takedown pin...
Topics: homemade_nerf, nerf_blaster, nerf_caliburn, nerf_homemade, stl, nerf_slamfire, nerf, Mechanical...
2
2.0
Mar 5, 2021
03/21
by
Gabriel Spressola (SlayerNefarox)
data
eye 2
favorite 0
comment 0
I designed adaptor this to convert the Nerf MEGA Cycloneshock to a powerful Elite blaster.
Topics: 3D Printing, stl, cycloneshock, Nerf_Mod, nerf_cycloneshock, Nerf_Blaster, Nerf, nerf_mega,...
2
2.0
Jan 5, 2021
01/21
by
June Atalanta (06CalendarGirl)
data
eye 2
favorite 0
comment 0
The Mistresskey is a rail mountable singled Mega shooter that is built from off the shelf Caliburn/Talonclaw hardware and is powered by a K26 spring! It is capable of 70+fps and weighs less than a pound. The Mistresskey can comfortably fit on most primary blasters to give you a backup shot or an anti special capability. The Mistresskey also acts as a rail riser with a top Picatinny rail to mount scopes or other accessories on. Hardware List(subject to small changes, parts listed are to McMaster...
Topics: Nerf_Blaster, Nerf_gun, masterkey, stl, nerf_mega, Sport & Outdoors, thingiverse, nerf,...
1
1.0
May 21, 2021
05/21
by
ct5x (ct5x)
data
eye 1
favorite 0
comment 0
This thing was made with Tinkercad. https://www.tinkercad.com/things/eJrGArh2pqE My printer is 15 cm high / 20 cm wide / 15 cm long The Print have 100% infill. Have Fun to Play a Speed Loader!
Topics: nerf Speed loader, Nerf_gun, Nerf Rival, thingiverse, 3D Printing, nerf, Nerf_Blaster, Nerf_Mod,...
3
3.0
Jun 7, 2021
06/21
by
Benjamin N-- (Hawki007)
data
eye 3
favorite 0
comment 0
This is the battery cover from BlackSteelProps. It was meant to me molded and cast in resin, but it should work when just printed, so I felt like posting. Print it upside-down so the outside is down.... I think...
Topics: nerf, nerf_stryfe, thingiverse, Nerf_Mod, nerf_battery, stl, Nerf_Blaster, Hobby,...
3
3.0
Jun 7, 2021
06/21
by
Benjamin N-- (Hawki007)
data
eye 3
favorite 0
comment 0
This is the old windowed motor cover from BlackSteelProps. It was meant to me molded and cast in resin, but it should work when just printed, so I felt like posting. It is meant to be epoxied and integrated onto the shell. Print it upside-down so the windowed part is down.
Topics: nerf_motor, nerf, cover, nerf_motor_cover, nerf_stryfe, thingiverse, Nerf_Mod, Hobby, stl,...
2
2.0
Jun 6, 2021
06/21
by
Wemade It (WeMadeIt)
data
eye 2
favorite 0
comment 0
3D printed nerf rival https://youtu.be/PplPKkfyCLY
Topics: nerf, rival, Nerf_Rival, thingiverse, Nerf_Mod, DIY, stl, Nerf_Blaster, Nerf_gun
6
6.0
Jan 15, 2021
01/21
by
Steffen Scholtes (DaDave)
data
eye 6
favorite 0
comment 0
Well I lost my original Swarmfire batterycover therefore I made a new one. It fits pretty well. Nearly as good as the original. If you got questions or suggestions feel free to ask. Remixes and makes are welcome.
Topics: thingiverse, Nerf_Weapon, Nerf_Blaster, stl, Toys & Games, Nerf_gun, Nerf_Mod, nerf
2
2.0
Jun 22, 2021
06/21
by
Nunya Business (Sillybutts)
data
eye 2
favorite 0
comment 0
A set of paddle mag releases for the TalonClaw and TalonClaw U! The standard version is two parts, one half for Talons, one half for Katanas. I have also included two other versions that use ONLY Talons or ONLY Katanas. Enjoy!
Topics: stl, homemade_nerf, blaster, nerf_blaster, thingiverse, nerf_homemade, nerf, nerf_katana_mag,...
2
2.0
Jun 7, 2021
06/21
by
Heath Heil (Mrheathpants)
data
eye 2
favorite 0
comment 0
This is the mag I use personally, and the one I talk about in my Pigeon Mk8 overview. This has an angled feed, which puts the darts straight with the flywheels, which means more power, more accuracy, and less decaps. These have been fitted exactly to the mk8 and so the bottom plate will act as a stopper for overinsertion. If you need different ones, try the two sources I included for this remix.
Topics: nerf, thingiverse, nerf modding, stl, nerf magazine, nerf mag, Hobby
2
2.0
Jul 22, 2021
07/21
by
Nunya Business (Sillybutts)
data
eye 2
favorite 0
comment 0
After 4 months of development, I present: The Talon Claw Slamfire kit! (Also known as the Slamfire is Much Preferred kit, or SIMP kit (thanks for that name Slug)) This is a kit that replaces the Kiri, MagUpper, and top rail of the Talon Claw. In turn, it gives you slamfire! **The kit does NOT modify the existing grip, trigger, or sear of the blaster.** This kit works with any spring load from k31 to k14. Just good luck slamfiring a k14! Non-printed parts: - 3 4-40 screws (2 and a takedown pin...
Topics: homemade_nerf, nerf_talon_claw, nerf_blaster, nerf_homemade, stl, nerf_slamfire, nerf, Mechanical...
6
6.0
Jan 17, 2021
01/21
by
Fox Colberg (Kal430Nerf)
data
eye 6
favorite 0
comment 0
A nerf holster, can hold any blaster if it does not interfere. Meant as a small of back backup. I printed this on a dremel3d idea builder, at medium settings, and that's what i've used to prototype. FYI you might need to do a little cleanup.
Topics: nerf, nerf gun, nerf blaster, thingiverse, nerf rail, Sport & Outdoors, nerf holster, nerf 3d,...
2
2.0
Sep 14, 2021
09/21
by
Nunya Business (Sillybutts)
data
eye 2
favorite 0
comment 0
This is a passive Talon magwell, similar to the one for the Caliburn made by CaptainSlug. This system uses 2 mag releases, like a wildcard adapter. However, instead of Talon and Katana mags, the two releases work on Talon and full length magazines. An adapter insert is used when you wish to use Talon mags, and removed to use full length magazines. This kit replaces the BMag right, left, front, and core, as well as the mag releases and midblock. The BMag right, left, and front changes are just...
Topics: stl, thingiverse, homemade_nerf, nerf, nerf_blaster, Mechanical Toys, nerf_talon, nerf_indra,...
1
1.0
May 1, 2021
05/21
by
now not (Cream_Soda_Guy)
data
eye 1
favorite 0
comment 0
simple friction fit rail sight it attaches to standard nerf nstrike tactical rail has been tested and works on the following: stryfe rapidstrike hammershot regulator
Topics: stl, Nerf_Mod, Nerf_gun, nerf, Nerf_Blaster, Hobby, thingiverse, nerf_sight
1
1.0
Jul 22, 2021
07/21
by
Nunya Business (Sillybutts)
data
eye 1
favorite 0
comment 0
After 4 months of development, I present: The Caliburn U Slamfire kit! (Also known as the Slamfire is Much Preferred kit, or SIMP kit (thanks for that name Slug)) This is a kit that replaces the Coupler, MagBack, and top rail of the CBU. In turn, it gives you slamfire! **The kit does NOT modify the existing grip, trigger, or sear of the blaster.** This kit works with any spring load from k31 to k14. Just good luck slamfiring a k14! Non-printed parts: - 3 4-40 screws (2 and a takedown pin for...
Topics: homemade_nerf, nerf_blaster, nerf_homemade, nerf_caliburn_u, stl, nerf_slamfire, nerf, Mechanical...
7
7.0
Apr 16, 2021
04/21
by
Dan Romano (xcnerd88)
data
eye 7
favorite 0
comment 0
This is my second version of the original single shot shell. This should allow for depression of all air restrictors (on the stock gun) and works great in my modified sledgefire. They printed fine in PLA and the gun has much better FPS (I plan to build a chronograph soon for measurable results). Check out my other designs for a standard 3 shot rear load sledgefire shell. If there is any interest in a two shot version let me know.
Topics: nerf_clip, shell, Nerf_Blaster, thingiverse, NERF_AMMO, nerf, stl, Nerf_gun, Nerf_Shell, Toys &...
7
7.0
Mar 12, 2021
03/21
by
Jason Helton (Heffnut5000)
data
eye 7
favorite 0
comment 0
This caused the Mega Dart to fly straight and increased distance by about 10'. The rifling does cause the dart to rotate keeping its glide path straight. I am making a screw on version with an adapter and will post very soon. Enjoy
Topics: thingiverse, nerfbarrel, nerf_barrel, nerf, Nerf_gun, Nerf_Mod, stl, Other, nerf_mods, Nerf_Weapon
3
3.0
Mar 5, 2021
03/21
by
thatchawat napasab (yodyo2)
data
eye 3
favorite 0
comment 0
This is a thumb holed version of the recon stock I've uploaded earlier I've printed it out this time lol I've split it into 5 parts with 2 connectors the connector will need a little bit of sanding before connecting it because I didn't accounted for tolerance when modelling it i connected the part with an abs sludge I've diluted a bit with more acetone making it a bit less sludg-gy (its vary effective ) then I sanded it down just a little bit with a low-grid sanding sponge And I will be sanding...
Topics: stl, nerf, nerf_retaliator, stock, Nerf_Mod, nerf_stock, Models, Nerf_Recon, Nerf_gun, thingiverse
8
8.0
Apr 30, 2021
04/21
by
Connor Amet (cdamet23)
data
eye 8
favorite 0
comment 0
This is a spin on skiserg's Nerf magazine holder. It is lighter, doesn't have sides, and says "So Tacticool" on the side. It functions the same as his, but has a slightly different design. The holes in the side do not at all affect performance. Check out some of my other designs such as aFallout New Vegas muzzle break modified for a Nerf Gun, Lego compatible Halo MA5C Assault Rifle and the Jet mouthpiece and bottle from Fallout. Even more are on the way soon, possibly including Lego...
Topics: stl, nerfgun, Nerf_gun, nerf, nerf_simple, Nerf_Blaster, Nerf_Weapon, Toy & Game Accessories,...
9
9.0
Jan 13, 2021
01/21
by
(donutcat)
data
eye 9
favorite 0
comment 0
Update: New designs with 13mm barrels for better dart fit. These will no longer fit inside 4"fittings and you'll most likely need to find a custom shell solution for them due to the odd sizing. There are four files outlined below: - 61shot_13mm_shell_insert.stl - The basic design. Just the barrels, the minimum necessary for mounting in a shell. - 61shot_13mm_shell_insert.step - Same as above but in step format for easy modification. - 61shot_13mm_shell_capped.stl - Same as the insert but...
Topics: thingiverse, Nerf_Weapon, NERF_AMMO, stl, Nerf_Blaster, nerf_dart, Toys & Games, nerfgun,...
1
1.0
Nov 30, 2021
11/21
by
Yang Sansheng (Dsfrick)
data
eye 1
favorite 0
comment 0
Document Authorization Description: The design is all open source. The core idea is to use the willow nail feature to replace the bearing to reduce the cost. You can obtain all the core documents of the design, but this does not mean that you have the design. The design follows the CCNC protocol and open source communication. Neither the design nor the derivative of non principle changes of the design can be used for commercial purposes. This design is specially opened for commercial use free...
Topics: nerf, thingiverse, Toys & Games, Nerf_gun, stl, Nerf_Blaster, Nerf_Mod, nerf scar
3
3.0
Mar 5, 2021
03/21
by
Russell Verduzco (Diessell)
data
eye 3
favorite 0
comment 0
Replacement Chain for the Razorbeast, chambered for micros. The file named 1 link is one chain link for testing your printer, if you want to have it longer/shorter you'll need to adjust the stl's. The MK3's now have a extra flat bit on the bottom to help with loading the clip.
Topics: stl, nerf, Nerf_razorbeast, Nerf_vintage, Mechanical Toys, Nerf_Mod, Nerf_Blaster, thingiverse
4
4.0
Apr 20, 2021
04/21
by
Andrew Aydelott (Aydelott)
data
eye 4
favorite 0
comment 0
Nerf hyperfire barrel attachment that works. this is a Drop in part there should be drop in part with no post processing, all the others I’ve tried on here have issues. enjoy
Topics: thingiverse, hyperfire, nerf_hyperfire, stl, Nerf_Mod, Hobby, Nerf_gun, nerf, Nerf_Blaster
2
2.0
Apr 27, 2021
04/21
by
Leonardo Bohorquez (Leob52)
data
eye 2
favorite 0
comment 0
Some small targets multiple sizes
Topics: nerf, thingiverse, Nerf_Blaster, Nerf_gun, stl, nerf_stryfe, Toys & Games, Nerf_Mod
5
5.0
Mar 3, 2021
03/21
by
Grzegorz Buczyński (MandalloreWorkshop)
data
eye 5
favorite 0
comment 0
Nerf Rapidstrike Battery drawer front piece. If yours gone missing or broken (like mine), feel free to reprint it yourself. Tested and working. Split in two to reduce the support need to zero.
Topics: nerfgun, Nerf_Blaster, Sport & Outdoors, nerf, thingiverse, Nerf_battery_cover,...
2
2.0
Jan 6, 2021
01/21
by
(Taffi)
data
eye 2
favorite 0
comment 0
A barrel to print as one. - You ust need some small screws to attach it - No assembling needed - i printed it with a ender 3 pro
Topics: Nerf_Blaster, Nerf_gun, stl, Hobby, nerfgun, barrel, nerf_hammershot, thingiverse, hammershot,...
2
2.0
Jun 22, 2021
06/21
by
Nunya Business (Sillybutts)
data
eye 2
favorite 0
comment 0
Have you ever grabbed your Caliburn or TalonClaw grip and thought "this thing is just too long"? Well, here's your solution! For each the TC and the Burn, there are two variants of the grip. 'Stubby' has the same front length with reduced rear length, while 'Stubbier' has both front and back shortened. There are also versions of each with separated sear screw locations (idea borrowed from Taffy), as well as grip inserts for each grip. Make sure to use the correct variant of each file...
Topics: stl, homemade_nerf, blaster, nerf_blaster, thingiverse, nerf_homemade, nerf, nerf_caliburn,...
2
2.0
May 21, 2021
05/21
by
Victor Montgomery (TNMadrigal)
data
eye 2
favorite 0
comment 0
This is a replacement hopper release for the nerf rival perses. It was designed to stop accidental ejections of the hopper. Please comment if you have any problems or thoughts to make it better.
Topics: nerf perses, nerf hopper, Toys & Games, thingiverse, nerf mag release, nerf rival, nerf gun,...
4
4.0
Apr 20, 2021
04/21
by
David Egan (Tactical_nerf)
data
eye 4
favorite 0
comment 0
this is a body kit for the nerf rayven it includes and extended stock extended carry handle and a dual stage flywheel cage I used a 3d model of the nerf raven to design this which can be found here *https://www.thingiverse.com/thing:2320835* I recommend using epoxy putty around the motor covers to make it seamless as well as a thin metal bar to hold the tactical rails together. HARDWARE 4 6mm wide 2 1/2" long bolts 5 self tapping screws 1 metal bar (1/8" thick or less) INSTALATION...
Topics: thingiverse, Nerf_Mod, stl, nerf kit, Hobby, nerf raven, Nerf_gun, Nerf_Rayven
2
2.0
Mar 13, 2021
03/21
by
Andrew Tran (EnderSavesTheDay)
data
eye 2
favorite 0
comment 0
Some things I started for my Talon Claw now for full-sized Caliburn. Edit Log: 12/7/2019-- Made some edits to stock spacer to stiffen up the m-lok functionality and provide more clearance for a QD mount. Updated HGuard (front/right/mono) to bring sides out and provide more clearance for the slide if you are to use actual m-lok accessories on the rail.
Topics: thingiverse, nerf, Sport & Outdoors, homemade_nerf, Nerf_Blaster, nerf_homemade, Nerf_Mod, stl
2
2.0
Mar 31, 2021
03/21
by
Jesper Korndal (Whosa)
data
eye 2
favorite 0
comment 0
Alternative to Worker side rails
Topics: thingiverse, Nerf, nerf_stryfe_picatiny, nerf_stryfe, Nerf_Blaster, Hobby, Nerf_Mod, stl
2
2.0
Dec 14, 2021
12/21
by
Ian Adey (RedCowl)
data
eye 2
favorite 0
comment 0
This is a blaster kit that I designed for the Nerf Rival Knockout. This blaster has a few variants. There is a single Spring Thunder shell variant, a single Flypoint shell variant, and a Double Barrel Flypoint shell variant. The links to these shells can be found below: (Or can be bought from GDop26. This blaster was designed to need as few purchased components as possible. I was able to accomplish this by using 8 magnets and 1 or 2 o-rings. The blaster is assembled using the original nerf...
Topics: Nerf_Mod, nerf, Nerf_Blaster, Nerf_gun, stl, thingiverse, Toys & Games, Nerf_Rival
8
8.0
Apr 26, 2021
04/21
by
Thore Miessen (Zakufan)
data
eye 8
favorite 0
comment 0
If you need an additional handle for your dart blaster, this one may be for you. It was designed for the Retaliator / Recon blaster's tac rails, so if you plan to use it with other blasters, you might tweak the rail attachment a little. Cheers, Thore
Topics: nerf, thingiverse, Nerf_Blaster, nerf_attchment, Nerf_gun, stl, 3D Printing, nerf_accessories
2
2.0
Mar 22, 2021
03/21
by
Tungsten EXE (tungstenexe)
data
eye 2
favorite 0
comment 0
Currently working on another rapidstrike mode with solenoid. This is a solenoid bracket I came up with. parts can be printed without support. https://youtu.be/EsnAoejyvKs
Topics: stl, Hobby, nerf, nerf solenoid, nerf mod, nerf rapidstrike, thingiverse
4
4.0
Jun 12, 2021
06/21
by
(Postmortal_Pop)
data
eye 4
favorite 0
comment 0
Summary This is a simple remix of the Nerf Hammershot - Uncompensated and the 7 Dart Cylinder. All I did was move attach the support for the Cylinder to the Barrel Piece so that it supports the cylinder without need for other prints. Other than that, I trimmed the edges and added a sight channel. Big thanks to deusnefum and Horsengineer for their work! Print Settings Printer: QIDI X-Pro Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 15% Filament: Unknown PLA Red Notes: If you Print this...
Topics: Nerf_gun, Nerf_Mod, nerf, hammershot, thingiverse, nerf_hammershot, stl
1
1.0
Jul 22, 2021
07/21
by
Nunya Business (Sillybutts)
data
eye 1
favorite 0
comment 0
After 4 months of development, I present: The Talon Claw U Bullpup Slamfire kit! (Also known as the Slamfire is Much Preferred kit, or SIMP kit (thanks for that name Slug)) This is a kit that replaces the Coupler, MagBack, and top rail of the TCUB. In turn, it gives you slamfire! **The kit does NOT modify the existing grip, trigger, or sear of the blaster.** This kit works with any spring load from k31 to k14. Just good luck slamfiring a k14! Non-printed parts: - 3 4-40 screws (2 and a takedown...
Topics: homemade_nerf, nerf_blaster, nerf_homemade, stl, nerf_slamfire, nerf, nerf_talon_claw_u_bp,...
3
3.0
Mar 5, 2021
03/21
by
Daniel Pocock (JackRabbitNerfer)
data
eye 3
favorite 0
comment 0
With the limited number of options available for a Nerf Demolisher cover for the holes left when a HAMP is removed I made this one, it has a picatinny rail built into it. I've only done one full test print of this, it will need to be secured on, I'd recommend a couple of screws either side, through the shell into the middle block. Feel free to use this, but i would ask if print this item to sell then please consider tipping me so I can carry on developing nerf modifications
Topics: stl, nerf, Nerf_Mod, nerf_stryfe, nerfgun, Toys & Games, Nerf_Blaster, Nerf_gun, thingiverse
1
1.0
Aug 8, 2021
08/21
by
Nunya Business (Sillybutts)
data
eye 1
favorite 0
comment 0
Alternate magwell for my Slamfire Caliburn kit. Based off the 05-09-19 version of the Monolithic Talon/Katana Caliburn magwell. Go to that listing for the extra bits needed for the magwell.
Topics: Mechanical Toys, nerf_caliburn, thingiverse, homemade_nerf, nerf_blaster, nerf_slamfire,...
2
2.0
Jun 21, 2021
06/21
by
Nunya Business (Sillybutts)
data
eye 2
favorite 0
comment 0
This is a foregrip for the Caliburn U with a closed top and overall more rigid construction. Kerb23 has been using this grip on his k14 Caliburn U to push the upper limits of springer FPS.
Topics: homemade_nerf, thingiverse, nerf_homemade, stl, nerf, blaster, nerf_caliburn, Mechanical Toys,...
