1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Mauricio Camayo (macacoangel)
data
eye 1
favorite 0
comment 0
I have this old Tippmann A5 converted with a Tacamo to accept magazines, sadly the magwell received the round head magazines. I wanted to updated to more reliable ones, so wanted to buy mcs ones... they are out of stock since forever. While looking here I found Untangle (https://www.thingiverse.com/Untangle) great work, and with a little of fidgeting on my part I came up with the Tacamo base and then added his DMAG receiver. Quick and Dirty but works Also modified the locking mechanism as it...
Topics: Magfed_paintball, thingiverse, Magwell, paintball, stl, Sport & Outdoors, magfed
2
2.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Dominick Nikifor (Idiots_YouTube)
data
eye 2
favorite 0
comment 0
//ABOUT I designed this barrel nut off of the design of the barrel cap that i found on this sight, i decided that I wanted my MG100 to look nicer so I made a suppressor that could fit over it. In the files I have also created a thread pattern for custom barrels if you wish to design one, as I have also designed a new thread pattern specifically for this model. //ASSEMBLY The assembly of this is fairly easy, hopefully in the future I can design a more easy to use design for beginners but for now...
Topics: Magfed_paintball, thingiverse, planeteclipse, 3D Printing, paintball, MG100, emf100, stl,...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Thomas Schulze (-k0p3-)
data
eye 1
favorite 0
comment 0
Basic Picatinny mount in 1 part I used the parts of him and joined them together! https://www.thingiverse.com/thing:2140772 M3 nut and M3x30mm bolt any tips are greatly appreciated :=) Click on my account to see more models I created.
Topics: Magfed_paintball, thingiverse, airsoft, Softair, paintball, picatinny_mount, stl, Sport &...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Thomas Schulze (-k0p3-)
data
eye 1
favorite 0
comment 0
This is a paintball sight! Based on the research I did the most common angle for the max range is 5 degrees! You can use this on standard paintball guns or Mil-Sim Rifles! This is a compromise between useability, ease of use, and immersive gameplay! m3 bolt 30 mm long and nut any tips are greatly appreciated :=) Click on my account to see more models I created.
Topics: Magfed_paintball, thingiverse, iron_sights, airsoft, paintball, stl, Sport & Outdoors
2
2.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Felix Scholz (scholzo)
data
eye 2
favorite 0
comment 0
I made a Mag Coupler for the Valken M17 Mags. It fits very tight so you have to push the mags in and it will hold. I printed it with ABS to make sure it withstands the force of playing paintball. But i think PLA+ and 3mm Walls will do the job.
Topics: valken_m17, thingiverse, paintbal, coupler, mag, magazin, valken, mags, stl, dualmag, Sport &...
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Jpz30 (Jpz30)
data
eye 1
favorite 0
comment 0
This is a friction fit front sight for the tiberus T15 marker. just slide it onto the front of the barrel. you might need to put a piece of hockey tape around the barrel for extra support but it should work just fine. you need to include the actual sight too. STEP file is included if you want to modify it into a different marker.
Topics: Magfed_paintball, thingiverse, paintball_accesories, paintball, Toys & Games, stl
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Chase Matthews (Mariolink1)
data
eye 1
favorite 0
comment 0
Modular paintball box mag for markers that accept MCS Helix / DMAG mag heads. Operates off VMech's M1 auger feed hopper system . Simply tear down the hopper, extract the feed mechanism, and bolt on the printed parts. Additionally, you will need a variety of M3 and M4 nuts, bolts, and potentially thread inserts if you want to be fancy. Other mag heads could probably work by adding the mag profile to the testplate object. Designed to take Dye-type speed feeds or the remix source speed feed.
Topics: Magfed_paintball, thingiverse, paintball, stl, Sport & Outdoors, magfed
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Jpz30 (Jpz30)
data
eye 1
favorite 0
comment 0
This is a friction fit front sight for the tiberus T15 marker. just slide it onto the front of the barrel. you might need to put a piece of hockey tape around the barrel for extra support but it should work just fine. you need to include the actual sight too. STEP file is included if you want to modify it into a different marker.
Topics: Magfed_paintball, thingiverse, paintball_gun, paintball_accesories, paintball, Toys & Games, stl
1
1.0
Apr 19, 2022
04/22
Apr 19, 2022
by
Peter Andrikopoulos (peter_121_GR)
data
eye 1
favorite 0
comment 0
This is a picatinny flashlight mount for a 25mm. It requires a single screw of 30 mm in length and a nut to stay in place.
Topics: Magfed_paintball, thingiverse, flashlight, flashlight_mount, paintball, mount, picatinny, stl,...
2
2.0
Jan 18, 2022
01/22
Jan 18, 2022
by
thor von walhalla (thor171)
data
eye 2
favorite 0
comment 0
printed this from PETG, but I think something flexible would be better.
Topics: thingiverse, Magfed_paintball, Hobby, stl, paintball, cal.50 paintball
2
2.0
Jan 18, 2022
01/22
Jan 18, 2022
by
Alexander Christl (Funktastic)
data
eye 2
favorite 0
comment 0
Ich habe nach einer Möglichkeit gesucht, um Dreck im Handguard zu vermeiden und gleichzeitig die EMF100 optisch ein wenig aufzuwerten. Nachdem ich nichts im Netz gefunden habe, habe ich mich hingesetzt und die Clips selbst konstruiert und gedruckt. Das Ergebnis passt relativ gut, ist aber noch ein wenig in Arbeit, da manche noch ein paar Milimeter Bearbeitung brauchen. Ansonsten funktionieren die Clips sehr gut und es ist auch ohne Probleme ein Hammerhead Oneshot Lauf möglich, ohne das die...
Topics: Sport & Outdoors, thingiverse, Paintball, Planet Eclipse, EMF100, planet_eclipse_emf100,...
2
2.0
Dec 13, 2021
12/21
Dec 13, 2021
by
Cam Wilkins (camswilkins)
data
eye 2
favorite 0
comment 0
This is a low profile ejector cover for the paintball FGC9 MKI, it gives more clearance to access the charging handle and allows you to see the cool ejector action while spitting paint without letting your hand hit it. The hardened ejector mount using the M6 screw in the image is also on my profile
Topics: fgc9_mkI, ejector, stl, Magfed_paintball, thingiverse, Mechanical Toys, fgc9
2
2.0
Dec 1, 2021
12/21
Dec 1, 2021
by
Cedric Fischer (Mistvieh)
data
eye 2
favorite 0
comment 0
Hi all you need to build this is a 3d printer, some filament, a barrel insert which fits your paintballs, an 18mm x 2,5mm O-ring, some sanding paper and ofc a t15. Have fun :) PS: Buy a steel insert x) and lubricate the o-ring after you placed it inside the back of the barrel with marker oil. !!!DO NOT SELL THIS PRODUCT!!!
Topics: Magfed_paintball, thingiverse, stl, Sport & Outdoors, paintball
2
2.0
Nov 30, 2021
11/21
Nov 30, 2021
by
Norman F. (Fuchsteufel)
data
eye 2
favorite 0
comment 0
Für alle, die ihre obere Klammer in Benutzung der Fast Mag-Halterung verloren haben
Topics: Magfed_paintball, paintball_marker, Dye, DYE_DAM, thingiverse, magfed, stl, Sport & Outdoors,...
2
2.0
Nov 30, 2021
11/21
Nov 30, 2021
by
Dave Hamelin (anthraxdeath)
data
eye 2
favorite 0
comment 0
This is a remix for the bolt hole that was a little confusing, so made it to fit M5x35 hex screw
Topics: airsoft, thingiverse, magfed, stl, foregrip, Sport & Outdoors, grip, paintball
3
3.0
Oct 14, 2021
10/21
Oct 14, 2021
by
(Exos3D)
data
eye 3
favorite 0
comment 0
Looked around and there really wasn't what I was looking for in the first strike speed loader market so I decided to design my own. Printing: -Pla - 10 walls are recommended - holds a bit more then 10 balls you can decide if you want a top to help count them the one with the larger base (top 2) :)
Topics: thingiverse, easy, stl, first strike, speed, speed loader, first strike rounds, Sport &...
3
3.0
Oct 14, 2021
10/21
Oct 14, 2021
by
Danny Hoogesteger (Untangle)
data
eye 3
favorite 0
comment 0
this was originally made as a spring compression tool for the UNW P90mag. but I later moved on to a different mechanism were you wind up the spring. and I kinda put is a side as a “failed” thing. but then I run into the thing what if your mag gets dirty and you like to make a attempt to clean it out with out taking it apart? so after trying some things did I remember that I made this thing and that is could be used for this. technically this can be used for other mags as well. but the...
Topics: thingiverse, unw p90, stl, Sport & Outdoors, paintball, magfed
2
2.0
Aug 22, 2021
08/21
Aug 22, 2021
by
Daniel Mombrei (Mombrero)
data
eye 2
favorite 0
comment 0
Butt Stock mit integriertem Magazin Halter für ein Ersatz Magazin Für die First Strike T15 oder Scout
Topics: 3D Printing, Tiberius_Arms, T15, magfed, buttstock, paintball, stl, thingiverse, Magfed_paintball
2
2.0
Aug 22, 2021
08/21
Aug 22, 2021
by
Danny Hoogesteger (Untangle)
data
eye 2
favorite 0
comment 0
this is made to extend the back part of your APEX2 with the goal to hide the barrel underneath in case you like the look of that better. there are a view sizes 2, 3, 4 inch extensions. and for 2 barrel sizes 7/8 and 1inch thick. and it uses 4x m4, 6mm length grub screw - MOVIE Link: https://odysee.com/@UntangleWORKS:a/UNW-APEX2-extender:0
Topics: Suppressor, magfed, Sport & Outdoors, apex, paintball, stl, thingiverse, Magfed_paintball
3
3.0
Aug 22, 2021
08/21
Aug 22, 2021
by
Danny Hoogesteger (Untangle)
data
eye 3
favorite 0
comment 0
this is made to slide over a paintball barrel so to basically hide a long barrel under the fake Suppressor they have been made for 2 barrel sizes 7/8 and 1 inch thick. and it uses 4x m4, 6mm length grub screws - MOVIE Link: https://odysee.com/@UntangleWORKS:a/UNW-APEX2-extender:0
Topics: Suppressor, Sport & Outdoors, paintball, stl, thingiverse, Magfed_paintball
2
2.0
Aug 22, 2021
08/21
Aug 22, 2021
by
Danny Hoogesteger (Untangle)
data
eye 2
favorite 0
comment 0
I have used this pattern for year’s now but it was time to replace my original spray paint mask. so I made a 3d printable design of it. I would print this without a skirt or brim and so on so you can use print the biggest size possible on smaller print beds and use a low quality layer setting since it will speed up the printing
Topics: camo, spraypaint, spray_paint, magfed, Sport & Outdoors, paintball, stl, thingiverse,...
2
2.0
Aug 8, 2021
08/21
Aug 8, 2021
by
Roy Wolfe (RoyDerWolf)
data
eye 2
favorite 0
comment 0
Saw the handguard for another marker/rifle/something and thought it looked pretty neat. I have adapted this to fit onto Tippmann TMC paintball markers; the length just about fits into the 25cm height of an Ender 3 -- my 3D printer. The original has various sizes; I just needed this one. As I'm more partial to canines than felines, I tried to redesign the face to maybe be a bit more canine. With mixed results ... The photo shows it on my TMC, alongside the [keymod...
Topics: keymod_handguard, paintball, handguard, Barrel_shroud, thingiverse, magfed, tippmann_tmc, Sport...
3
3.0
Jul 25, 2021
07/21
Jul 25, 2021
by
Danny Hoogesteger (Untangle)
data
eye 3
favorite 0
comment 0
this is the same lower as the original FGC68 lower but this one is unmarked
Topics: thingiverse, magfed, fgc68MKII, fgc68, Sport & Outdoors, paintball, stl, Magfed_paintball,...
2
2.0
Jul 22, 2021
07/21
Jul 22, 2021
by
Danny Hoogesteger (Untangle)
data
eye 2
favorite 0
comment 0
I have made a collection of NORAil shrouds that will work for this TMC68TMC platform the NORA rail kit will only work with the NORA type Shrouds for the FGC68TMC you will need to use 1x M3 bolt 12mm long that can be found here https://www.thingiverse.com/untangle/collections/fgc68-tmc movie link https://odysee.com/@UntangleWORKS:a/UNW-FGC68TMC:a
Topics: Sport & Outdoors, magfed, fgc68, tippmann_tmc, TMC, fgc68TMC, stl, Magfed_paintball, paintball,...
2
2.0
Jul 22, 2021
07/21
Jul 22, 2021
by
Danny Hoogesteger (Untangle)
data
eye 2
favorite 0
comment 0
I have made a collection of shrouds that will work for this TMC68TMC platform you will need to use 1x M3 bolt 12mm long that can be found here https://www.thingiverse.com/untangle/collections/fgc68-tmc movie link https://odysee.com/@UntangleWORKS:a/UNW-FGC68TMC:a
Topics: Sport & Outdoors, magfed, fgc68, tippmann_tmc, TMC, fgc68TMC, stl, Magfed_paintball, paintball,...
4
4.0
Jul 22, 2021
07/21
Jul 22, 2021
by
Tyler (Paintball_Designs)
data
eye 4
favorite 0
comment 0
Wait, a free body kit for the Planet Eclipse MG100? Yes sir! Do I need to print new eye/ detent covers? No! Your stock eye/ detent covers will work with this! Won't the paintballs just go out the top? Your MG100 included a stopper, just install it on there. Don't overtighten! If you lost yours, here's a new one with anti-chop technology! https://www.thingiverse.com/thing:3753689 What's the catch? It's a bit tricky to put on. I'm not liable, should it happen, if you strip any screws on your...
Topics: Sport & Outdoors, magfed, MG100, stl, paintball, thingiverse
3
3.0
Jul 22, 2021
07/21
Jul 22, 2021
by
Unknown DE (UnknownDE)
data
eye 3
favorite 0
comment 0
Paintball PBS-4 Silencer Designed for barrels with a 22mm diameter like deadlywind or all american u need a m5 press nut non functional, only optic
Topics: Sport & Outdoors, barrel, magfed, silencer, stl, Magfed_paintball, paintball, ak47, thingiverse
2
2.0
Jul 22, 2021
07/21
Jul 22, 2021
by
Unknown DE (UnknownDE)
data
eye 2
favorite 0
comment 0
Paintball muzzle Designed for barrels with a 22mm diameter like deadlywind or all american u need a m5 press nut non functional, only optic
Topics: Sport & Outdoors, barrel, muzzle, muzzle_brake, stl, Magfed_paintball, paintball, thingiverse,...
3
3.0
Jul 22, 2021
07/21
Jul 22, 2021
by
Unknown DE (UnknownDE)
data
eye 3
favorite 0
comment 0
Mock Silencer for Paintball Barrels with a 22m Diameter (without Thread) like All American or Deadlywind Fibur-X U need a M5 press nut non functional, only optic
Topics: Sport & Outdoors, magfed, silencer, stl, Magfed_paintball, paintball, thingiverse,...
3
3.0
Jul 22, 2021
07/21
Jul 22, 2021
by
Unknown DE (UnknownDE)
data
eye 3
favorite 0
comment 0
Kriss Vector 13ci Stock u need m5 press nuts to fix the buttplate on the stock print with 40% infill
Topics: Sport & Outdoors, magfed, 13ci_tank, kriss_vector, stl, Magfed_paintball, paintball, buttstock,...
4
4.0
Jul 22, 2021
07/21
Jul 22, 2021
by
Danny Hoogesteger (Untangle)
data
eye 4
favorite 0
comment 0
this rail kit will make it possible to use the FGC-68TMC shrouds on your TMC. this are free floating shrouds so you can basically use any barrel thickness you like. making the TMC platform more flexible then with your stock TMC setup you will need to use 1x M3 bolt 12mm long and 3x M5 bolt 30mm long that can be found here https://www.thingiverse.com/untangle/collections/fgc68-tmc
Topics: Picatinny_rail, rail_riser, Sport & Outdoors, magfed, fgc68, tippmann_tmc, TMC, fgc68TMC, stl,...
2
2.0
Jul 22, 2021
07/21
Jul 22, 2021
by
Danny Hoogesteger (Untangle)
data
eye 2
favorite 0
comment 0
why would you want to use this? to complete the look and feel of the FGC9 (MKII). if that is not what you are going for the FGC68TMC rail kit will act like a rail riser. when you use the normal buffer tube of the TMC. or you could go and make it lower with the lower buffer tube kit or one of the A5/X7 butt stock adapters that I made that can be found here https://www.thingiverse.com/untangle/collections/fgc68-tmc
Topics: Sport & Outdoors, magfed, fgc68, tippmann_tmc, TMC, fgc68TMC, stl, Magfed_paintball, paintball,...
3
3.0
Jul 3, 2021
07/21
Jul 3, 2021
by
Danny Hoogesteger (Untangle)
data
eye 3
favorite 0
comment 0
there are a view different models of these 5.56 Magazine pouch out there from emersongear (single, dual, single + pistol pouch) this insert should fit in them both. with this insert you can easily clamp down the mag in the pouch and remove it to the point that you don’t need a elastic at the top in my opinion. but you can still use that if you like. these have been made for the UNW P90 mags. but airsoft P90 mags should work as well since it have the same dimensions.
Topics: unwp90, magfed, p90, airsoft, unw_p90, Sport & Outdoors, Magfed_paintball, thingiverse, stl,...
3
3.0
Jul 3, 2021
07/21
Jul 3, 2021
by
Luis Barbosa (Halsahaf)
data
eye 3
favorite 0
comment 0
In summary is Empire BT4 (and variants) Mag adapter. Its very precise, has a nice fit between marker and mag adapter. Has a manual with all the details on how to print, use and adapt. Variants supported: (all markets with bt4 as base) - BT4 - BT4 Slice - BT Delta and elite - BT Omega - BT Erc - BT G36 - Maybe more, I don't remember more. Takes 4 and half picatinny rails from ball entrance to back of the marker, and about the size of 1 and half to the front. Editable files also included in case...
Topics: bt4, bt assault, magfed, paintball_marker, thingiverse, adapter, magazine, Picatinny_rail, Other,...
3
3.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Luis Barbosa (Halsahaf)
data
eye 3
favorite 0
comment 0
HPA buttstock for 13CI bottles Hole is 51.9mm, will fit most 13CI bottles. To secure it in place, I suggest using a strip of griptape in the bottom part of the stock. Pad will be fixed with pressure, for extra security use a bit of glue. Editable files will be added soon.
Topics: stl, 13ci_tank, thingiverse, magfed, butstock, tippmann_tmc, hpa, 13ci, Tippmann, Magfed_paintball,...
4
4.0
Jun 22, 2021
06/21
Jun 22, 2021
by
Marcus Östman (mostman)
data
eye 4
favorite 0
comment 0
Tippmann TMC Mag Winder, three versions. One for use as a "keyring", snug fit so it stays in place. Two to use with a bit screw, one snug fit and one loose.
Topics: stl, thingiverse, magfed, Sport & Outdoors, tippmann_tmc, Tippmann, tmc, paintball,...
6
6.0
Jun 20, 2021
06/21
Jun 20, 2021
by
Jonathan Maksin (PhantomJM)
data
eye 6
favorite 0
comment 0
This is a speed loader for Milsig Squarehead magazines. It is best used with a motorized hopper but it will work with gravity fed loaders. Please see the Readme file for required materials and assembly instructions.
Topics: Sport & Outdoors, magazine, paintball, speed loader, thingiverse, mag fed, stl, square head,...
6
6.0
Jun 20, 2021
06/21
Jun 20, 2021
by
Jonathan Maksin (PhantomJM)
data
eye 6
favorite 0
comment 0
This is the basic version of my speed loader for Milsig Squarehead magazines. Unlike my other version, this model does not use a button to load the paint. This basic version requires you to turn the hopper upside down to stop the flow of paint, but it's simpler to print and requires less assembly. The feed neck was designed to use the thumb screw from a Viewloader elbow, a Spyder feed neck or similar.
Topics: Sport & Outdoors, magazine, paintball, speed loader, thingiverse, mag fed, stl, square head,...
7
7.0
Jun 20, 2021
06/21
Jun 20, 2021
by
Jorrit Haarsma (FiXeL666)
data
eye 7
favorite 0
comment 0
Do speedball players wear you down as a magfed player? (with an Milsig SMG) well i got ya covered! Print this, cut up a stock SMG mag, add a rotor and start mowing faces in full auto! Or do something else.... Solidworks file is included if you want to alter this... well enjoy! If you need one for the Tippmann TMC, that one can be found here: https://www.thingiverse.com/thing:3823629
Topics: Games, paintball, wtf, thingiverse, stl, Milsig, Milsig SMG, Magfed
5
5.0
Jun 19, 2021
06/21
Jun 19, 2021
by
(Mombrero)
data
eye 5
favorite 0
comment 0
Summary This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/iOqF72XH23g Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.6 Infill: 20 Filament: any PLA -
Topics: msc, magazine, box_mag, feeder, First_strike, paintball, thingiverse, Milsim, Hopper, stl,...
3
3.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Unknown DE (UnknownDE)
data
eye 3
favorite 0
comment 0
Universal Fake Schalldämpfer für Paintball-Läufe. Innendurchmesser beträgt 26mm und muss ggf. angepasst werden falls er zu locker sitzt. Die seitliche Bohrung hat einen Durchmesser von 6mm. Man benötigt eine M5 Einpressmutter die mithilfe eines Lötkolbens oder ähnlichem eingeschmolzen wird. Empfehlenswert sind M5x5x7 !!! DIE SCHALLI HAT KEINERLEI FUNKTION, NUR OPTIK !!!
Topics: paintball silencer, silencer, magfed, Sport & Outdoors, paintball, thingiverse, stl
4
4.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Danny Hoogesteger (Untangle)
data
eye 4
favorite 0
comment 0
this model is a lot stronger then the MKII model. and the charging handle should work a lot nicer as well. you can leave the size the same as in the FGC9 MKII manual. but will place a spring behind it. in a size of 7 or 8mm OD. 0.6mm wire thickness in a length of 90 or 95mm long. and is installed basically the same but I will make a video about this upper on a later date also for this upper print it in 100% infill!
Topics: fgc68MK2, Magfed_paintball, fgc, magfed, Sport & Outdoors, stl, paintball, thingiverse, tipx,...
8
8.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Danny Hoogesteger (Untangle)
data
eye 8
favorite 0
comment 0
this is the shroud set based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker Movie link to MKII update on the project https://odysee.com/@UntangleWORKS:a/FGC68MKII-update-and-installation-and-tips:a How do I assemble the...
Topics: fgc68MK2, Magfed_paintball, fgc, magfed, Sport & Outdoors, paintball, thingiverse, fgc68,...
3
3.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Danny Hoogesteger (Untangle)
data
eye 3
favorite 0
comment 0
this is the shroud set based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker Movie link to MKII update on the project https://odysee.com/@UntangleWORKS:a/FGC68MKII-update-and-installation-and-tips:a How do I assemble the...
Topics: Magfed_paintball, fgc, magfed, Sport & Outdoors, paintball, thingiverse, fgc68, fgc9mkII,...
3
3.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Sören Jäckel (HappyHippoSnack)
data
eye 3
favorite 0
comment 0
Thats just the Lower Part of the Original. I fixed the Problem that you cant load the new CF Mags. Now it works nice and smooth.
Topics: emf100, Magfed_paintball, magfed, Sport & Outdoors, paintball, thingiverse,...
3
3.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Luis Barbosa (Halsahaf)
data
eye 3
favorite 0
comment 0
In summary is Empire BT TM7 Mag adapter. Its very precise, has a nice fit between marker and mag adapter. Has a manual with all the details on how to print, use and adapt. Editable files also included in case you want to improve it. Read manual first! If you feel like extra supportive, buy me a coffee link: Paypal Me
Topics: Tippmann, Magfed_paintball, TM7, adapter, magazine, Empire, magfed, paintball, thingiverse, empire...
3
3.0
Jun 11, 2021
06/21
Jun 11, 2021
by
McLeod (McLeod_44)
data
eye 3
favorite 0
comment 0
Clef pour chargeur Eclipse EMF100 Cette clef permet préparer rapidement et simplement les chargeurs CF20. La poignée permet aussi l'ouverture facile les chargeurs. Une version de poche (impression avec support) est aussi disponible pour recharger rapidement et n'importe où. --- Google Traduction (Sorry) --- Key for Eclipse EMF100 charger This key allows you to quickly and easily prepare the CF20 chargers. The handle also allows easy opening of the magazines. A pocket version (print with...
Topics: emf100, Magfed_paintball, CF20, lanceur, magfed, emf, Eclipse, paintball, thingiverse, Sport &...
4
4.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Danny Hoogesteger (Untangle)
data
eye 4
favorite 0
comment 0
this is the shroud set based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker
Topics: fgc68MK2, Magfed_paintball, fgc, magfed, Sport & Outdoors, paintball, thingiverse, fgc68,...
3
3.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Danny Hoogesteger (Untangle)
data
eye 3
favorite 0
comment 0
this is the shroud set based on the FGC-9 MKII shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker. to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker
Topics: Magfed_paintball, fgc, magfed, Sport & Outdoors, paintball, thingiverse, fgc68, stl
3
3.0
Jun 11, 2021
06/21
Jun 11, 2021
by
Danny Hoogesteger (Untangle)
data
eye 3
favorite 0
comment 0
with this 3d printable Sar12 lower is it possible to give your sar12 a custom look with out having to modify your original lower. --- for most paintball things will I move to a different model since I can’t keep doing what I’m doing in the way I was going so I will give this a try before I stop making things. there is basically nothing to download now in this file. I have to send this one to you personally once I have received the model code from you, name, email and payment. then I will...
Topics: Magfed_paintball, Carmatech, magfed, Sport & Outdoors, paintball, thingiverse, SAR12, stl
