4
4.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Michael Boey (Druidire)
data
eye 4
favorite 0
comment 0
screw-on climbing hold, moonshaped jug designed for 3x 5mm screws
Topics: rock_climbing, thingiverse, climbing, stl, Sport & Outdoors, climbing_hold
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Rob Thomas (robertthomascoastalengineer)
data
eye 1
favorite 0
comment 0
This is a mount for a 1 inch PVC. Im using it for mounting a flounder gigging light on the boat.
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Rob Thomas (robertthomascoastalengineer)
data
eye 1
favorite 0
comment 0
This is a mount for a 1 inch PVC. Im using it for mounting a flounder gigging light on the boat.
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
(DorinDXN)
data
eye 1
favorite 0
comment 0
This is just a spacer for this Hand Gripper (pictured) as helper for small hands. You need to adjust the tension, then squeeze the gripper and insert the spacer. If you want to adjust the tension further more, you need to remove the spacer and repeat the procedure. Enjoy a better grip :)
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Thieu N (surewhynot)
data
eye 0
favorite 0
comment 0
Requested by Jzc0125. Enjoy 17mm width x 95mm height
Topics: thingiverse, gun stand, stl, Sport & Outdoors, heritage rough rider
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Water Lou (waterlou)
data
eye 0
favorite 0
comment 0
It's a adaptor for IKEA TISKEN suction cup hook, so that you can place your Brompton bag on a flat wall without screw.
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Rachid Zermani (rjz5400)
data
eye 1
favorite 0
comment 0
I simply removed the nut attachments and when i printed in esun PLA+ i scaled the entire thing down to 97% for a tight press fit onto the case plate bolt. I used the press itself and a socket to push it down at the top of the xl650 stroke. hope that makes sense its my first remix Good luck I needed clearance due to using a locknut on bottom because non dillon dies
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Mike (someusernamehere)
data
eye 0
favorite 0
comment 0
### DO NOT ADD THIS TO A COLLECTION. My account is perpetually attacked leading to model delisting and removal from your collection. Elect to download it immediately. This is the 393 rd re-upload of the design as the former versions were delisted due to abusive individuals exploiting Thingiverse's 'Report' feature. __Apologies as I am not reposting to keep it in the current/newest list.__ Converts the Rollerblade old school circa-1995 ABT (Active Braking Technology) system to be able to mount a...
Topics: thingiverse, rollerblade, inline_skates, stl, Sport & Outdoors
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Sammie (buildbysammie)
data
eye 0
favorite 0
comment 0
This owl statue geocache is remixed from the owl facing front stl by BrOncO who remixed it from the Owl statue by cushwa. It is the same owl statue but with an added compartment that can be closed by threading in the head. The thread is quite large when printed at a scale of 100% but this is done so the file can also be printed at a lower scale, for example 50%. The thread was designed in Solidworks after which it was added to the owl statue using Meshmixer. There is one file for the head but...
Topics: owl, thingiverse, geocache, Geocache_Container, threaded, geocahing, stl, Sport & Outdoors
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Joseph Cleland (joeycleland78)
data
eye 0
favorite 0
comment 0
Boot hook for a climbing deer tree stand.
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Frank Schneising (FSchneising)
data
eye 1
favorite 0
comment 0
TomTom cover with Quadlock base on top. With this thingy, you can mount your phone to your TomTom Head.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Landon Davis (WERT451)
data
eye 0
favorite 0
comment 0
This is a clip that helps The Hurricane Seat stay together when caring it.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Joseph Cleland (joeycleland78)
data
eye 0
favorite 0
comment 0
Replacement Hinge pin for a Rhino Rack Batwing Awning. They want $15 a pair for these retail.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Tyler Sosi (ShovelshoT)
data
eye 0
favorite 0
comment 0
Hello & thanks for checking out my model. This is the logo for the National Rugby Leagues Wests Tigers that I have designed to be a 3D printed magnet. I have included 3 files (Black, White & Orange) for use with MMUs or multi color same layer with single extruder style prints and then also 1 file (Single) for layer height color change style prints. MMU style version should be printed face down while Single version should be printed face up. Each version has 2 - 8x3mm magnet holes...
Topics: thingiverse, NationalRugbyLeague, WestsTigers, stl, Sport & Outdoors
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Armed Geek (armedgeek)
data
eye 0
favorite 0
comment 0
Ranger beads designed to be simple, tactile and… well, not plain. Works with 550 paracord, no need to hollow out the core.
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
(3DPrinted_Freedom)
data
eye 1
favorite 0
comment 0
This device is used to significantly increase the rate of fire for AIRSOFT rifles. This has NOT BEEN TESTED YET This is a device similar to the cold finger fingertip aperture based upon my own fingers using my limited 3d modeling experience. This was created as a free alternative file from scratch. Instead of paying 10 dollars for the file or 25 for the product, I decided to make my own model. I will be printing one and testing it however I would appreciate it if others could too and let me...
Topics: cold finger, thingiverse, fast, airsoft, freedom, bump, madeforall, Cold Finger Free, free, stl,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Josh Liebowitz (realtaquitos)
data
eye 0
favorite 0
comment 0
OneWheel GT rear pad slider. Protects against some light wear when you put the rear down on the ground. Use 2-sided tape to secure. Printed on my Prusa mini standing up on its edge with a brim. Make sure to orient the print so that when it's printed the bed movement is along the length of it (so it doesn't topple over). Settings: PLA+ 0.4mm nozzle Brim 50% infil. No supports needed (obviously if standing on edge).
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Dagi Doeg (dagidoeg)
data
eye 1
favorite 0
comment 0
Bike mounting for Garmin Instinct Solar. I am not sure, but think it can fit for the Garmin Instinct (Regular) too.
Topics: thingiverse, bicycle_mount, bicycle, Bike_mount, bike_computer_mount, gps_mount, bike, stl, Sport...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Alex Hough (ahough86)
data
eye 0
favorite 0
comment 0
This is an extra round holder designed for the AXSR, but it should fit any Keyslot mount. BOM: - Round Holder (printed) x1 - M8 x 8mm Heat-set Insert x3 - Keyslot Locking Screw x3
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
(Joecool509)
data
eye 0
favorite 0
comment 0
This is an oar clip for a zodiac boat. holds oars on the 30mm buttons already installed on the boat. Print so the clip opening is up.
Topics: thingiverse, Oar, Zodiac, Boat, stl, Sport & Outdoors
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Franklin Mosely (SloMose)
data
eye 0
favorite 0
comment 0
This is a jig to install an align vanes on arrow shafts. There are three pieces, the jig base, vane holder and index knob. The index knob has three magnets 0.25 x 0.1in and the base has one of the same size and all epoxy glued in place. I use it all the time and it works well and much less expensive than the commercial jigs. I use spring clamps to hold it in place for about 15 to 20 seconds while the CA glue to sets. ENJOY.
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
mousseau jean michel (angeljmm)
data
eye 1
favorite 0
comment 0
YT Decoy Garmin mount on frame. Not bullet proof but worth to share. Use good 3M adhesive to stick on frame You can use hot air to adapt to your frame
Topics: garmin_mount, GARMIN, thingiverse, decoy, stl, Sport & Outdoors
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Winston Chin (uncleton)
data
eye 0
favorite 0
comment 0
A replacement 3D printed Incline Mag Control lever for a Cateye cs-1000 Cyclosimulator.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
gynta dunz (gynta)
data
eye 0
favorite 0
comment 0
to mark your reloading ammo case with an sharpie. note: maybe the hole to mout the sharpie is too small. scale up in the slicer or sand :)
Topics: thingiverse, case marker, brass marker, stl, Sport & Outdoors
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Rich Annino (lhv32)
data
eye 1
favorite 0
comment 0
This is a series of wall hangers that I designed to display collector disc golf discs. I made them using high end Stratasys equipment, so I'm honestly not sure how they would print on anything else (especially with non-soluble support), but good luck!
Topics: collector, thingiverse, stand, wall_mount, disc, display, wall, golf, hanger, Wall_Hanger, stl,...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Jacob Tannahill (Maverick0197)
data
eye 0
favorite 0
comment 0
Pointing foregrip reminiscent of the PTK foregrip. Includes both a picatinny and MLOK version. I printed flat on its back with only support on build plate *Please note that I have not printed the Picatinny variant.
Topics: thingiverse, foregrip, airsoft, airsoft_foregrip, stl, angled_foregrip, Sport & Outdoors
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Kai Flogaus (fiaskogaul)
data
eye 1
favorite 0
comment 0
Haken für die Rückenlehne des ORU Beach LT - Faltkajaks. Daran lassen sich wunderbar Rucksäcke oder Taschen anbringen. Die Haken werden über das hinter der Rücklehne verlaufende Gummiband fixiert. Dazu einfach das Gummiband in die dafür vorgesehene Führung setzen (siehe Bilder). ================== Hooks for the backrest of the ORU Beach LT - folding kayak. This is great for attaching backpacks or bags to the backrest. The hooks are fixed via the rubber band running behind the backrest....
Topics: Kajak, Heken, Kayak, Beach-LT, Beach, studentdesignchalenge, stl, Foldingkayak, Sport &...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Philippe Laflamme (Laflamme)
data
eye 0
favorite 0
comment 0
Fits all crosman 22XX ou 13XX. Its a quick release for crossman original shoulder stock. Use good filament. You will need a spring for a ink pen. Cut the small spring in haft.
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Daniel Einsiedel (danielbigmac)
data
eye 1
favorite 0
comment 0
Hello! Planning to go for skiing next week, I designed this mask holder. It is inspired by https://www.thingiverse.com/thing:5162394 but just a little more delicate and prints without supports. I tried it with helmet straps up to 1,7cm but I think that it fits even bigger ones.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Jim Ham (MrPorcine)
data
eye 0
favorite 0
comment 0
Kayak mount for a Garmin Etrex Legend GPS receiver. Mine has a serial port, no USB.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
(mowcius)
data
eye 0
favorite 0
comment 0
This is a Topeak QuickClick compatible mount designed for KH and DDK unicycle bases. The specific bag you use and the angle of your seat will affect the fit, but this has been designed to be as compatible as possible without any major compromises. It should be compatible with all of the following bags from Topeak: Sidekick Wedge Pack Wedge Pack II Aero Wedge Pack Aero Wedge Pack DX Shown above on a DDK base. Ensure you print this at 100% infill or the saddle bolts will crush the hollow...
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
bq bq (bqg)
data
eye 0
favorite 0
comment 0
Thermarest winglock pump to Exped mattress adapter Thermarest pump : https://www.thermarest.com/fr/matelas/sleeping-pad-accessories/mini-pompe-neoair-micro/13227.html Exped downmat mattress : https://www.exped.com/france/en/product-category/mats/downmat-hl-winter-lw Explications en Français sur https://www.randonner-leger.org/forum/viewtopic.php?id=40762
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Mark Grubbs (grubbsmc)
data
eye 1
favorite 0
comment 0
Holster for Throwing Knives 1.10 Width 0.353 Depth 5.036 Height Holds 3ea small Throwing Knives 0.1025 Thick each. Print Time 4.58 Hrs 15 Meters of Filament
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Brayden Rodeheaver (Redneck90)
data
eye 1
favorite 0
comment 0
This is a working process!!! I recently have been really wanting an Airsoft silencer that met my needs, after searching for awhile I figured id just design my own. Once an hour passed and I had the silencer itself designed the way I liked it I decided to add some character to it, so I went with the straight fluting. I made this silencer to meet the needs of silence, being 1 solid piece, and having the durability it needed with. It has 14mm (ccw) threads and is 40mmx40mmx220mm, perfect for...
Topics: thingiverse, 6mm_airsoft, supressor, airsoft, airsoft_accesories, silencer, stl, Sport &...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Jason Alexander (jalexand)
data
eye 1
favorite 0
comment 0
A handle for a Ruger 10/22 magazine, and magazine joiners. The 10-round magazines are fiddly things to manipulate, and recess into the rifle receiver. This handle gives you something to grab onto to extract stuck magazines, and to rapidly orient the magazine during magazine changes in IPSC mini-rifle competitions. This is a remix of Vik's work to make the washer sit more flat and make the design look cleaner.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
(popatachi)
data
eye 0
favorite 0
comment 0
This is the remixed version of the angled, top mount picatinny rail adapter. The difference is the sizing for the two acorn nuts. These are sized for 10-32 acorn nuts that I got from a big box store. The gopro acorn nut has a smaller diameter than the ones I found in the hardware store. Both the top and rail slots were adjusted to accommodate the larger nut.
Topics: thingiverse, GoPro, GoPro_Mount, picatinny, stl, Sport & Outdoors
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Dmitry Kalsin (caktyc)
data
eye 1
favorite 0
comment 0
Fast Track (by Thirty Two) snowboard boots lacing clamp bracket. Divided in two parts for easy printing. Please weld or glue parts together and drill 1mm hole for the pin. I've printed it from PETG, seems to be strong enough.
Topics: laces, thingiverse, Snowboard, boots, stl, Sport & Outdoors
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Travis Rennemann (rennemannt)
data
eye 0
favorite 0
comment 0
The long awaited air pump hose clamp that is 100% compatible with WMFG air pumps that are commonly used by wing foilers and kiters. I'm sure that this would work for any air pump that has a 95mm diameter (~298.45mm circumference). We talk about the design here: https://www.youtube.com/watch?v=cF9MpK-uM8c Stop by our website: https://floridafoilers.com Enjoy!
Topics: air_pump, WMFG, thingiverse, kitesurf, airpump, wingfoil, clamp, hose_clamp, stl, Sport &...
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Marlon Weber (MRLNWBR)
data
eye 1
favorite 0
comment 0
Made for Ixon Core and 2c Permanent
Topics: thingiverse, stand, busch_mueller, lamp, storage, bike, stl, Sport & Outdoors
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Bartlomiej Styczen (Styku)
data
eye 1
favorite 0
comment 0
Tool carabiner for organizing climbing tools such as ice screws, axes, etc. Tested with static load of 10 kg for about 3 hours - no plastic deformation, breakage, or any other defects noticed. It is not meant for belaying nor any other safety related purposes. Use at your own risk. I am not happy with the gate, but I have no other ideas on how to make it better for printing in place, any remarks welcome. Print however you like, I tested it with anything between 0.2 and 0.4 layer height, 80 -...
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
ALEX GALAVOTTI (agalavotti)
data
eye 0
favorite 0
comment 0
This is my first prototype of a 10SP5 battery case for my e-bike. I did it because I was not satisfied by the ones on thingiverse. The concept is to have two sliding parts so to easy access the battery inside. Battery are held in place with silicone and some kapton tape. BMS is mounted as usual on top of battery strings. Use also soft tape on the wall sides to prevent bumping. Inside, there is a little frame that keeps the Bluetooth pcb apart from battery. I used a 20A BMS with bluetooth app...
Topics: thingiverse, 18650_battery, ebike, stl, Sport & Outdoors, battery case
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Stefan Visser (reparosai)
data
eye 1
favorite 0
comment 0
A way to attach 5 arrows to your X-Bow FMA Supersonic crossbow. Use the screw that is meant for the 'optional fish roll holder'.
Topics: stl, Sport & Outdoors, thingiverse
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
aj knox (halebop3)
data
eye 0
favorite 0
comment 0
remixed to hold stuff better
Topics: thingiverse, secret_stash, bicycle, 420, handlebar, stl, Sport & Outdoors
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Paul P (hulabaloo)
data
eye 1
favorite 0
comment 0
I remixed a few designs so I will list them here: maxis stock and fore-ends https://www.thingiverse.com/thing:2209954 https://www.thingiverse.com/thing:2222685 grip: https://www.thingiverse.com/thing:4762446 buffer threads: https://www.thingiverse.com/thing:3078671 carbon tube from amazon: https://www.amazon.com/gp/product/B07V4N1N42/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1&tag=thingiverse09-20 HARDWARE needed: AR-15 castle nut and AR grip screw. M2x10mm screws (2) for the...
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Dread Pirate Roberts (dread_pi)
data
eye 1
favorite 0
comment 0
A 31,6mm bicycle seatpost cradle. Used to mock up a seatpost design.
Topics: thingiverse, seatpost, cradle, road bike, yoke, 31.6mm, bicycle, bike, stl, seat post, Sport &...
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
David Schmitz (saubohne)
data
eye 0
favorite 0
comment 0
A HEMA discord project - https://discord.gg/j2mWgJt There was a request to make a grip that is comparable to the common French grips you can get pretty much everywhere. We figured it doesn't hurt to help people when availability of grips is a problem.
Topics: thingiverse, grip, sword, foil, epee, stl, sport_fencing, Sport & Outdoors, fencing
0
0.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Alejandro Gonzalez (alejandro_gonzamart)
data
eye 0
favorite 0
comment 0
THIS IS A COVER FOR MYCHRON5 2T GO-KART COMPUTER BATTERY CASE
Topics: thingiverse, MYCHRON, GO-KART, MYCHRON5 2T, stl, MYCHRON5, Sport & Outdoors
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
max Muster (Corvo_A)
data
eye 1
favorite 0
comment 0
an adapter for mounting picatinny accesoires to a Hi-Capa airsoft pistol. i took my measurements from a KLI/SRC brand model, don't know how well it will fit other brands, but from what i've heard hi-capas in general tend to be pretty similar. enjoy!
Topics: airsoft_parts, stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Dan Maffucci (maffud)
data
eye 1
favorite 0
comment 0
All design credit goes to Trucologie's design: Camelbak Crux reservoir dryer. This is the same thing, but I made it more robust by making it thicker. The original design broke quickly for me. This one should last longer.
Topics: stl, Sport & Outdoors, thingiverse
1
1.0
Apr 20, 2022
04/22
Apr 20, 2022
by
Trevor Gainey (Starlord1956)
data
eye 1
favorite 0
comment 0
This adapter allows the use of the polar scope illuminator with the dovetail plate fixed in position.
Topics: astronomy, stl, Sport & Outdoors, thingiverse
