0
0.0
Jan 16, 2021
01/21
by
Adellia Adams (AddieMaker)
data
eye 0
favorite 0
comment 0
I needed a wall mount to store a couple of magazines for my new Savage 64F rifle. They have angled bottoms so I designed this to directly fit that angle. As usual for me, this is designed to be wall-mounted using standard drywall screws. Works well and the slots are scaled to be just a little loose so that they contain without being snug or difficult to use. I would imagine a strip of adhesive velcro could be added to use this with a velcro-wall/door in a safe as well.
Topics: Savage Magazine, 22_long_rifle, savage, thingiverse, Sport & Outdoors, magazine, Savage 64F,...
0
0.0
Jul 25, 2021
07/21
by
Marcus Reynolds (Phantom_Mark)
data
eye 0
favorite 0
comment 0
Remix of the Customizable Case (Rectangular) Added some design elements and adjusted proportions to suit holding 4x Brocock Commander Air Rifle Magazines. Printed in "Standard" Quality on an Ender 3 V2 in PLA. I will update the design with a hinged lid sometime in the future maybe.
Topics: thingiverse, Magazine_Holder, Brocock_Commander, magazine_loader, Sport & Outdoors, stl,...
1
1.0
Mar 16, 2021
03/21
by
Michael Kroitoru (KRMICH29)
data
eye 1
favorite 0
comment 0
Smith Wesson M&P 12/15 round Double Mag Holster.
Topics: holster, thingiverse, Sport & Outdoors, M&P9c, Smith Wesson, smith_and_wesson,...
0
0.0
Jul 25, 2021
07/21
by
Will Barton (willbert6100)
data
eye 0
favorite 0
comment 0
Designed this holder similar to the ones you see in the barber shops and dentists Doctor waiting rooms. I haven't printed it yet as it seems to be a very long print, though I have printed longer ones before. Also this thing was designed in inches so you will have to multiply the scale by 25.4 if like my version of Creo it imports the stl as millimeters.
Topics: thingiverse, magazine_container, wall_mount, magazine_holder, magazine, stl, Containers
0
0.0
Jun 22, 2021
06/21
by
Lukk Sarna (Lukk17)
data
eye 0
favorite 0
comment 0
Printed with PLA.
Topics: stl, thingiverse, holder, Magazine Holder, magazine, g36, Hobby, airsoft
1
1.0
May 1, 2021
05/21
by
Kevin Bulgrien (kbulgrien)
data
eye 1
favorite 0
comment 0
https://www.thingiverse.com/thing:3023742 Ruger 10/22 Straight 10rd Magazine by bluemike807 July 28, 2018 re-imagined as a Chamber Safety Flag by removing magazine artifacts and by adding a barrier where a round sits. The barrier extends upward to block the chamber opening and to prevent the firing mechanism from approaching the chamber. Though a typical chamber safety flag shaped like a .22LR round can work in this firearm, releasing the bolt is a bit finicky. This project takes an alternative...
Topics: stl, gun, ruger_1022, Ruger_10-22, 22LR, 22_long_rifle, firearms, safety_flag, Sport &...
1
1.0
Mar 16, 2021
03/21
by
Oskar Butovič (OskaRus)
data
eye 1
favorite 0
comment 0
Safe wall holders for easier drawing magazines.
Topics: Sport & Outdoors, thingiverse, glock_magazine, pmag_magazine, Magazine_Holder, stl, pmag
0
0.0
Mar 15, 2021
03/21
by
Mike M (Irish_Mac)
data
eye 0
favorite 0
comment 0
This is a remix/combo of https://www.thingiverse.com/thing:3863046 and https://www.thingiverse.com/thing:4420037 I'm a novice at CAD, but it turned out well enough for me to use for my mags.
Topics: pistol_magazine_rack, thingiverse, wall_control_pegboard, Other, Wall_Control, walther_p22,...
1
1.0
Mar 16, 2021
03/21
by
Victor Gellerstad (VictorGeller)
data
eye 1
favorite 0
comment 0
We waste too much real-estate storing all our magazines and after searching online for a cheap/easy solution and not finding one, I have decided to make one myself. I have seen various designs on Thingiverse which were great but lacked ease of printing, expandability and wasted a lot of filament/time. As a result, I have decided to (with inspiration from others) draw and design my perfect version of a 5.56 / 5.45x39 magazine wall mounted storage system which can securely fit any magazine less...
Topics: thingiverse, gun_safe_accessories, AR15, gun_safe_rack, gun_safe_storage, stl, ar_15, AK47,...
0
0.0
Mar 15, 2021
03/21
by
Jeffrey Payne (jimmy_beam)
data
eye 0
favorite 0
comment 0
Several versions of AR-15 magazine pouches. I have tested the Tek Lok versions with 30 round pmags. I have not printed the belt versions. The lg belt is for 1.5" belts, sm is for 1" belts. The hardware I used to attach the tek lok and for the tension adjustments was all 8-32 threads, but any similar sized hardware should work fine. All versions will require at least 2x rubber spacers and 2x tension adjustment screws/nuts. I used holster making hardware from a different project.
Topics: AR-15, Mag Pouch, Sport & Outdoors, thingiverse, magazine holder, AR15, Magazine, Magazine...
1
1.0
Mar 16, 2021
03/21
by
Victor Gellerstad (VictorGeller)
data
eye 1
favorite 0
comment 0
We waste too much real-estate storing all our magazines and after searching online for a cheap/easy solution and not finding one, I have decided to make one myself. I have seen various designs on Thingiverse which were great but lacked ease of printing, expandability and wasted a lot of filament/time. As a result, I have decided to (with inspiration from others) draw and design my perfect version of a 5.56 / 5.45x39 magazine wall mounted storage system which can securely fit any magazine less...
Topics: thingiverse, gun_safe_accessories, ar_15, AR15, AK47, gun_safe_rack, gun_safe_storage, stl,...
1
1.0
Mar 15, 2021
03/21
by
Steven Giacci (sgiacci)
data
eye 1
favorite 0
comment 0
I could not find a compact Glock magazine holder for a picatinny rail that I liked, so I made one. I designed it initially for my Kel-Tec sub 2000 so I can carry an extra magazine on the picatinny rail, and have it fold flat without needing to remove it. So this is what I came up with. I used 1/8" shock cord to string it together, and I'm currently trying a high heat PLA to see how it holds up. If it fails, I'll run another print using a high strength nylon material. For now, 2.5mm x 30mm...
Topics: keltec, thingiverse, Sport & Outdoors, glock_magazine, picatinny, Glock, Magazine, 9mm,...
1
1.0
Mar 16, 2021
03/21
by
Brandon Baum (TNVolunteer)
data
eye 1
favorite 0
comment 0
This is a 3 magazine holder for the standard Glock 17, 17 round magazines. It holds the magazines at an angle so that they are easy to grab quickly. Printing is easy as it just prints on a flat surface and doesn't need supports. Takes about 3.5 hours to print at 20% infill. This may fit magazines from other guns with a little size manipulation, but the default size in the magazine holder slots is 23.5 mm. Definitely let me know if you end up making the holder and if you make it for a different...
Topics: glock, thingiverse, glock_magazine, magazine, Other, Magazine_Holder, stl, Glock_17
0
0.0
Mar 16, 2021
03/21
by
Victor Gellerstad (VictorGeller)
data
eye 0
favorite 0
comment 0
This is a remix from https://www.thingiverse.com/thing:398515 Loved the design but didn't want to waste filament on areas which don't add structural rigidity. Therefore here is the same design as Air_ but without the extra plastic and smaller 4mm screw holes. I also shortened it a bit to make for easier Ender 3 printing with larger Brims, Rafts, Skirts I printed with NO supports, a 20 layer Brim and 20% infill (to safely support loaded mags).
Topics: thingiverse, magazine holder, AR magazine rack, stl, firearms, Magazine Storage, airsoft, gun safe,...
2
2.0
Mar 15, 2021
03/21
by
Victor Gellerstad (VictorGeller)
data
eye 2
favorite 0
comment 0
We waste too much real-estate storing all our magazines and after searching online for a cheap/easy solution and not finding one, I have decided to make one myself. I have seen various designs on Thingiverse which were great but lacked ease of printing, expandability and wasted a lot of filament/time. As a result, I have decided to (with inspiration from others) draw and design my perfect version of a 5.56 / 5.45x39 magazine wall mounted storage system which can securely fit any magazine less...
Topics: thingiverse, gun_safe_accessories, AR15, AR_magazine, gun_vault, stl, ammunition_storage, AK74,...
0
0.0
Jun 11, 2021
06/21
by
Lukk Sarna (Lukk17)
data
eye 0
favorite 0
comment 0
Printed with PLA.
Topics: Magazine_Holder, m4_airsoft, m4_mag, holder, magazine, thingiverse, m4_magazine, Hobby, stl
0
0.0
Jun 11, 2021
06/21
by
Felix Chan (SapperChan)
data
eye 0
favorite 0
comment 0
To organize and store up to 3 magazines
Topics: Magazine_Holder, anschutz, thingiverse, Other, stl
0
0.0
Jul 25, 2021
07/21
by
Peter Bond (ps_bond)
data
eye 0
favorite 0
comment 0
Hinged case to hold 2 Weirauch HW100 magazines. Beats picking fluff out of them when they've been in your pocket. Requires: 3mmx20mm machine screws (I used socket head) 2 off, 6mmx3mm rare earth magnets, 4 off Adhesive (I used Loctite 480, but epoxy should be fine). There are clearances built in to all the parts; hopefully enough for most consumer-grade printers, but if not LMK. Considering adding thumbnail notches on the front. Printed with supports on the hinged sections for offset from base.
Topics: thingiverse, Sport & Outdoors, hw100, magazine_holder, magazine_storage, magazine, stl,...
0
0.0
Oct 14, 2021
10/21
by
Woolier Blueberry (Woolier)
data
eye 0
favorite 0
comment 0
this is the Magazine lip for the airsoft WE glock 17, original design by adrimoon i decided to modify the design so that drilling is not required to use the part. i used Ideamaker's Boolean function to do it.
Topics: g17, thingiverse, glock_magazine, part, we glock, stl, WE_g17, weapon, airsoft, Magazine_Holder,...
0
0.0
Oct 14, 2021
10/21
by
Tomas Slekys (H1tm4n)
data
eye 0
favorite 0
comment 0
Mag dimensions: 23.4mm x 34.4mm Needed hardware: 2 x M4 nuts 2 x washers (9mm outer, 4.4mm inner diameter), optional 2 x M4X30 bolts I only add supports on the sides, no supports are needed for the bolt holes
Topics: GBB, aeg, mp5, thingiverse, stl, dual_magazine_holder, airsoft, dual_magazine, Sport &...
3
3.0
Jan 18, 2021
01/21
by
Co An (Collintylr)
data
eye 3
favorite 0
comment 0
Just a basic remix of mjterry03's double magazine holder. I absolutely loved the the fit on the original file, but I figured that the provided belt clip wouldn't work for my style of play. So, I added an extremely basic addition so that I could attach the rig to my belt. Thanks again to mjterry03 and cdamet23 for their awesome work.
Topics: nerf, Nerf_Magazine, thingiverse, magazine, holder, Magazine_Holder, 3D Printing, stl
3
3.0
Apr 27, 2021
04/21
by
Steve Thone (sthone)
data
eye 3
favorite 0
comment 0
**This is a Duel Magazine Holder for S&W 4506 Mags.** I made this just for shooting competitions so I'm not sure if it would be suitable/comfortable for everyday carry. The retention spring is secured with a 6/32" Heat-set Insert and a 6/32" x 1/2" Screw. I'm still playing around with the infill used on the retention spring for proper tension as it might weaken over time but I printed everything in PETG at 80% infill for durability so I'll have to see how long it last. The...
Topics: 4506, thingiverse, magazine, Smith & Wesson, S&W, stl, smith_and_wesson, Magazine Holder,...
3
3.0
Mar 31, 2021
03/21
by
Jesse Summerfield (ankhadia)
data
eye 3
favorite 0
comment 0
Remix of functionaldiyer for my 9MM XDs.
Topics: Sport & Outdoors, magazine_pouch, mag_holder, thingiverse, Springfield_Armory, springfield_xd,...
6
6.0
Jan 4, 2021
01/21
by
Thomas (Bortugini)
data
eye 6
favorite 0
comment 0
Tested with original AK47 magazine (7.62 x 39) Hole for attachment with an M4 screw
Topics: Ak_47_762X39mm, ak47, stl, Hobby, Magazine_Holder, ak_47, thingiverse, magazine
0
0.0
Sep 14, 2021
09/21
by
Sebastian K (RagniHefthyn)
data
eye 0
favorite 0
comment 0
A Dual Magazine Clamp For 2 G&G UMP/UMG Magazines. For assembly you will need 1x M4x20 Socket Cap Screw and 1x M4 nut. Note: This is only sure to work with G&G Magazines. Could work with others, but I leave no guarantees that it does.
Topics: stl, dual_magazine_holder, thingiverse, dual_magazine, Double_Stack, Clip, G&G, Airsoft, UMP,...
1
1.0
Jun 11, 2021
06/21
by
Wes Foshee (wesf0shee)
data
eye 1
favorite 0
comment 0
I remixed this Glock magazine holder for printers with smaller build plates, like the MakerBot Sketch. This is a remix of the Glock 17,19,22,23 Mag Holder by gak92, which was a remix of the original Glock Mag Rack by functionaldiyer. Big thanks to both of them for the great work! I used Tinkercad to resize the original. This is my first remix, but I printed the design and tested it with my magazines, and it works perfectly. Printing: Dimensions are 59.54 x 134.89 x 31.75 mm. MakerBot Sketch is...
Topics: Magazine_Holder, glock_19, glock, makerbot_sketch, glock_22, Sport & Outdoors, thingiverse,...
0
0.0
Oct 15, 2021
10/21
by
John Smith (sivartdod)
data
eye 0
favorite 0
comment 0
Magazine holders for Springfield XD9. I created three different versions, 2 mag, 3 mag and 4 mag. I designed these to be a little lose for quick access to assure they will not snag or stick. Not perfect, but do what they're intended to do.
Topics: springfield_xd, thingiverse, springfield, stl, Other, Magazine_Holder, XD9
0
0.0
Oct 15, 2021
10/21
by
Scott Favaro (1337_M8)
data
eye 0
favorite 0
comment 0
10/22 magazine pouch based off of Blackmagic12 's magazine pouch design. This is an improved and more rigid version, which I have not printed/tested yet, I will update this DESC. with more information. UPDATE: Printed and it fits perfectly, to get the snap to go on you need to lightly push down on the magazine until it clicks. Will update again if I remember after my competition this saturday.
Topics: thingiverse, stl, ruger_1022, Other, Magazine_Holder, competitive_shooting, Ruger_10-22, ruger,...
0
0.0
Aug 22, 2021
08/21
by
Rag Castro (bloorag)
data
eye 0
favorite 0
comment 0
The original design worked great but apparently my magpul poly mags are a bit wider than typical metal surplus stuff, long term this cracked the pouch. I added reinforcement to the failure point, slightly elongated the overall height to accommodate a 30rd mag better and lastly i added about 2mm of width to the belt loop so it would fit my gun belt much better without me having to grind/file away.
Topics: ak47, Magazine_Holder, magazine, Sport & Outdoors, AKM, ak74, stl, thingiverse
39
39
Sep 24, 2021
09/21
by
Hobbies Ltd,
texts
eye 39
favorite 0
comment 0
Hobbies Weekly Magazine, Vol. 80, No. 2183
Topics: fretwork, brush holder, clothes line holder, specimen case, magazine holder, picture frame, meat...
3
3.0
Apr 27, 2021
04/21
by
kyle trahan (-KT-)
data
eye 3
favorite 0
comment 0
nerf rival mag holster, left or right side. loops through belt holds 2 mags each and fits all rival mag types.
Topics: rival, Nerf_Blaster, hir, Nerf_Belt_Clip, thingiverse, Nerf_gun, nerf_rival, nerf_rival_magazine,...
1
1.0
Jun 11, 2021
06/21
by
(Bortugini)
data
eye 1
favorite 0
comment 0
Summary Tested with original AK47 magazine (5.45 x 39) Hole for attachment with an M4 screw Print Settings Printer Brand: Anycubic Printer: All-metal Mega Supports: No Resolution: 0.3 for more details 0.1 Infill: min 35%
Topics: Magazine_Holder, ak_47, magazine, thingiverse, ak47, stl
2
2.0
Mar 17, 2021
03/21
by
jonathan schaffer (jbs)
data
eye 2
favorite 0
comment 0
Slide this onto your nerf tactical rail and put in a clip.
Topics: Toy & Game Accessories, nerf_stryfe, stl, nerf_clip, nerf_magazine_holder, thingiverse, nerf,...
2
2.0
Jun 20, 2021
06/21
by
Tüftel Typ (TueftelTyp)
data
eye 2
favorite 0
comment 0
inspired by thing:1811209 I designed my own holder Dimensions of the magazine see below Fits my Valken and Nuprol magazines needs a M5 x 40 hex socket + nut
Topics: battlemaschine, dual_mag, Sport & Outdoors, M4_AEG, thingiverse, valken, dual_magazine_holder,...
6
6.0
Mar 22, 2021
03/21
by
Dylan Raymond (DAraymond)
data
eye 6
favorite 0
comment 0
.223 / 5.56 magazine pouch with integrated belt loop. Designed to be printed with no supports in the upright position. Fits both the standard metal magazine and the PMag. Good retention with friction only. able to jump up and down with it on a belt and it stays in place.
Topics: magazine pouch, stl, 3D Printing, magazine holder, Mag pouch, thingiverse, magazine
0
0.0
Oct 14, 2021
10/21
by
Gasper Fabic (gasper5)
data
eye 0
favorite 0
comment 0
I needed to make more space, where I keep my Airsoft gear so I found Moorefoodnow's Pmag rack. I liked the design, the only thing that bugged me is that he only has 1 or 5 PMAG racks, and I didn't want to use the ones with 1 slot, because it had only one screw and I thought that I would rotate. So I made additional racks that hold 2, 3 and 4 PMAGs (1 and 5 PMAG racks are same as Moorefoodnow's, but I have included it here so it's all in one place)
Topics: thingiverse, rack, stl, m4_airsoft, m4_pmag, mounting_bracket, Other, airsoft, Magazine_Holder,...
2
2.0
Jan 7, 2021
01/21
by
Julien R (ju_riken)
data
eye 2
favorite 0
comment 0
Porte chargeur pour magasin M4 / STANAG C'est parmi mes premières conceptions, je suis parti d'un porte chargeur pour pistolet Sig sauer et j'ai épaissi les endroit susceptibles de casser. N'hésitez pas à reporter le moindre problème ;) Remix de cet objet, je n'arrive pas à le mettre en remix https://www.thingiverse.com/thing:4281033 Utiliser 2 vis M4*30mm et environ 85cm de shock cord de 4mm maxi 79mm de large (2 passants MOLLE), 2 passants MOLLE de hauteur également Imprimer l'arrière...
Topics: stl, M4A1, Magazine_Holder, porte_chargeur, STANAG, m4_airsoft, airsoft, molle, Sport &...
2
2.0
Mar 13, 2021
03/21
by
C (seashell_scientist)
data
eye 2
favorite 0
comment 0
Exactly like Meishel's, but crudely scaled up to mega mag dimensions. Using mountings and molle strips from the blitzshorta, sized to fit a 3x3 or 3x5 rows.
Topics: thingiverse, nerf, MOLLE, magazine_holder, Sport & Outdoors, stl
0
0.0
Sep 14, 2021
09/21
by
Tomas Cicmansky (T23lol)
data
eye 0
favorite 0
comment 0
I designed up this holder / hanger for 4x airsoft Glock magazines. Magazines hang about 4mm from wall perpendicular to this wall, bb / follower side to wall. This holder is compatible with all standard WE / KJW / TM magazines for G17, G18, G26, G19 etc ... Basically all standard G double-stack magazines. What You can seen in the picture is WE glock 17 with standard G17 mags. Info: Width between prongs is 23.5mm. Angle between wall and base plate of magazine is 108 degrees. Printing:...
Topics: Glock_17, wall_mount, stl, glock_18c, thingiverse, magazine, wallmount, Wall_Hanger, wall,...
3
3.0
Mar 8, 2021
03/21
by
shawn gallagher (1337gallagher)
data
eye 3
favorite 0
comment 0
Faceplates for the beautifully designed Version 2 magazine holders by Functionaldiyer I've included blanks and some logos Not sure why the preview pictures are all roundy and wonky but the actual files are crisp and not all ballooned out...
Topics: stl, thingiverse, shock cord, glock_magazine, magazine, magazine holder, Sport & Outdoors
203
203
texts
eye 203
favorite 1
comment 0
Remington 5
Topics: firearm, bolt, rifle, safety, magazine, trigger, picture, ammunition, remington, mechanism, safety...
3
3.0
Jan 17, 2021
01/21
by
Kenny Verhoeven-Rappa (XDr4g0nX)
data
eye 3
favorite 0
comment 0
I needed a little stand that I could use to hold my M4 AEG magazines for storage and before/during filling them with BB's. There are 2 versions, a straight version and a alternating version. There are 1 through 6 magazine holders available, print however much you want. Also check out my; [MP5 Mag Stand](https://www.thingiverse.com/thing:3193438) and; [AEP Mag Stand (CYMA CM.030)](https://www.thingiverse.com/thing:3193431) ----- Don't have a printer yourself? Buy it from me in my Etsy shop here:...
Topics: magazine_stand, airsoft, mag_stand, ar15, m4_aeg, stl, ar15_mag, XDr4g0nX, airsoft_accesories,...
2
2.0
Apr 1, 2021
04/21
by
Thomas (Bortugini)
data
eye 2
favorite 0
comment 0
Tested with original SIG 550 magazine Hole for attachment with an M4 screw
Topics: magazine_storage, magazine, thingiverse, Magazine_Holder, Hobby, SIG550, stl
1
1.0
Mar 18, 2021
03/21
by
Alex Wimpress (adog312)
data
eye 1
favorite 0
comment 0
Couldn't think of a way to put my magazines on my nerf wall with the hooks I had, so I designed this. Tested with numerous straight box magazines, biggest was 18 rounds, no issues at all. I doubt that this would work with drum mags or banana mags, but you're welcome to try. Print like it is in the file, with the long part sticking up. You can slide it on the obvious way, or you can rotate the mag ~90 degrees then hook it on (this is useful if there's stuff blocking it.)
Topics: Nerf_Magazine, Nerf_Blaster, thingiverse, Nerf_gun, nerf, pegboard, Organization,...
2
2.0
Jan 7, 2021
01/21
by
Reid Bailey (Reid_Bailey)
data
eye 2
favorite 0
comment 0
Grip'n'Rip Mag Clip =============== A simple belt clip for long and short **Vector V2** Gel Blaster Magazines. Carefully calibrated to keep magazines secure when moving but removable with a sharp downwards tug. Each clip requires 2 belt loops. Print with support and the opening facing upwards. Skirt or raft adhesion is highly recommended. Trim of the skirt/raft then press fit the belt loops onto the ends of the clip. Tested successfully with regular PLA. This should also work with KRYTAC G30...
Topics: stl, belt_clip, Magazine_Holder, Belt_Holder, Gel_blaster, Mechanical Toys, kriss_vector, airsoft,...
0
0.0
Oct 15, 2021
10/21
by
John Smith (sivartdod)
data
eye 0
favorite 0
comment 0
Designed 2 mag, 3 mag and 4 mag holder. I designed them to be a lose fit for quick access to assure they will not get stuck or snag. They're not perfect but work as intended.
Topics: thingiverse, stl, Other, Magazine_Holder, M&P, shield
2
2.0
Apr 20, 2021
04/21
by
Steve Hackley (Stehac)
data
eye 2
favorite 0
comment 0
Remix of FUNCTIONALDIYER's magazine holder. I wanted to be able to hold 5, so I redesigned a larger version.
Topics: thingiverse, Magazine_Holder, stl, shooting, Hobby, M1A1, m1a, Springfield_Armory, m14
3
3.0
Mar 2, 2021
03/21
by
Adrian Kelly (ahalekelly)
data
eye 3
favorite 0
comment 0
Holders for your Katana mags. On your 38mm belt. And thicker walls for better durability. Thanks Heath. Print in this orientation with no supports.
Topics: jet_katana_mag, nerf_magazine_holder, thingiverse, stl, Sport & Outdoors, nerf,...
1
1.0
Mar 10, 2021
03/21
by
Edison Huff (bamboost)
data
eye 1
favorite 0
comment 0
molle mag holders for talon magazines. no supports press-fit still testing for fit / finish currently working on the double stack and a quick-stick for attachment. for now try something like this for attachment: https://www.thingiverse.com/thing:3006861 find matching mag markers and couplers here: https://www.thingiverse.com/thing:4181042 - markers https://www.thingiverse.com/thing:4183159 - couplers
Topics: Talon, talon_mag_holder, caliburn, stl, thingiverse, talon_claw, gryphon, nerf_caliburn, talon_mag,...
1
1.0
Jun 7, 2021
06/21
by
Edison Huff (bamboost)
data
eye 1
favorite 0
comment 0
Ranger plates for getting quick purchase on your Talon mags. Slip on, easy grip, press fit. oriented for printing I suggest using PETG over PLA (only tested in PETG) for non-commercial use only please contact me for commercial licensing
Topics: caliburn, Sport & Outdoors, ranger_plate, nerf, magazine_floor_plate, Magazine_Holder,...
