Skip to main content
Internet Archive's 25th Anniversary Logo

2,244,505
UPLOADS


More right-solid

Show sorted alphabetically

More right-solid

Show sorted alphabetically

More right-solid
SHOW DETAILS
up-solid down-solid
eye
Title
Date Archived
Creator
Thingiverse Archive
Oct 15, 2021 chris bass (WW2Chris)
data

eye 1

favorite 0

comment 0

M52A1 fuse for the 60mm & 81mm Mortar, thread should be correct for real round.
Topics: thingiverse, mortar, stl, reenactment, Sport & Outdoors, WWII, WW2
Thingiverse Archive
Oct 15, 2021 Daniel Teich (KollegeMostrich)
data

eye 1

favorite 0

comment 0

Dies ist ein Filament Guide für meinen Ender 3 V2 Drucker mit Aluminium Dual Gear Extruder. Mich hat es immer gestört, dass das Filament ständig an der Einzugsöffnung entlang schrammt. Deshalb habe ich heute den ganzen kram fast 3 Stunden vermessen und mehrere Probedrucke angefertigt. Dies ist das Resultat und ich bin sehr zufrieden. Funktioniert auch mit den Stützstangen -falls ihr diese gekauft habt. Allerdings muss die Stange mit der langen Schraube auf der Seite des Extruders montiert...
Topics: filament, 3D Printer Extruders, thingiverse, filament_guide, creality_ender_3, stl, dual_extruder,...
Thingiverse Archive
Oct 15, 2021 Brennan Thomason (spelchek)
data

eye 1

favorite 0

comment 0

This is a bookmark/tool combo that I designed to put in a notebook I use for 3D printing notes and ideas. WARNING: It does have a tendency to slightly bend the top edges of whatever page it's on if you use the clip at the top. I don't personally mind, but if you like those super crisp edges, you may want something a little thinner or of a slightly different design.
Topics: stl, Office, thingiverse
Thingiverse Archive
Oct 15, 2021 golan dahan (G4ZO)
data

eye 1

favorite 0

comment 0

It is recommended to heat the nail before putting it into the TOP, be careful not to heat too much so that the plastic in the area does not melt, the nail can be strengthened with a little superglue
Topics: thingiverse, blowgun, stl, Arrows, 3D Printing, dart, darts, gun, arrow
Thingiverse Archive
Oct 15, 2021 D M (djmjr)
data

eye 0

favorite 0

comment 0

The clip that lets you attach the rake to the bin of our Petmate Arm & Hammer Bin and Rake pooper scooper broke, so I made up a quick one in OpenSCAD. Unscrew the handle, pull the broken clip off, and slide the new one on - easy peasy! Link to the bin I designed this for: https://smile.amazon.com/Petmate-71034-Scooper-Scented-Included/dp/B008FNKQSU/ Note that I tried to parameterize enough of the dimensions that it could be used for clipping 2 of any equal-sized handles to each other. If...
Topics: thingiverse, stl, pooper_scooper, Pets, petmate, pets
Thingiverse Archive
Oct 15, 2021 Julio Oscar Melgarejo (OscarJunior)
data

eye 0

favorite 0

comment 0

All the letters of the alphabet in Guns N' Roses font, including apostrophe and exclamation mark. No support needed, 0.2 mm.
Topics: rock, thingiverse, 3d_letters, stl, Signs & Logos, letters, font, Guns N' Roses
Thingiverse Archive
Oct 15, 2021 Chris Ch (doublec4)
data

eye 0

favorite 0

comment 0

This is a funnel designed to fit most common resin printing bottles such as those from eSun and the like. Common metal screen strainers fit snug inside so you no longer have to use your hand to hold them while pouring excess resin from your vat back into the bottle. Check out the video were you can see the funnels
Topics: resin_funnel, thingiverse, stl, 3D Printer Accessories, Funnel, resin_printer, resin
Thingiverse Archive
Oct 15, 2021 Eike Leverenz (Eirynhawk)
data

eye 0

favorite 0

comment 0

Topics: Hobby, thingiverse, bfg_warhammer_40k, stl, bfg, Battlefleet_Gothic
Thingiverse Archive
Oct 15, 2021 mei Ohmoriyama (Bear_Come_From_Forest)
data

eye 0

favorite 0

comment 0

Turn your old smartphone into a car sub-monitor Of course you can use it at home Map navigation Speedometer ECU information monitor Engine tachometer Monitor for ITS (Intelligent Transport Systems) Can also be used as a HUD Compact TV stand Drive recoder 3 types are uploaded This is one of them The parts composition is slightly different Printing difficulty is different Assuming a smartphone with a size of about 135 x 70 mm Designing The original data is designed based on the WX10K (Kyocera)...
Topics: stl, Automotive, thingiverse
Thingiverse Archive
Oct 15, 2021 Lucas Hale (LedHead56)
data

eye 0

favorite 0

comment 0

This tiki-inspired bobblehead was designed on Fusion 360. The head and legs print separately without support material. The threads are designed to fit a 9.5mm wide spring. The diameter of the thread is 10.7mm.
Topics: hawaii, bobblehead, thingiverse, Models, stl, easytoprint, tiki_statue, art, tiki, hawaiian, model
Thingiverse Archive
Oct 15, 2021 Brandon Clipner (90base)
data

eye 0

favorite 0

comment 0

Quick Design I made in Tinkercad to hold a 2 piece set of Flipsocket Lug nut sockets. I printed in PLA @ 20% infill. No Supports, No Rafts, etc.
Topics: stl, Automotive, thingiverse
Thingiverse Archive
Oct 15, 2021 SamMi 三米創作 (sammi656)
data

eye 0

favorite 0

comment 0

#molle clip hook slightly adjust the size to fit the molle strap on my backpack hang whatever you want!
Topics: thingiverse, molle hook, stl, molle clip, Sport & Outdoors, molle
Thingiverse Archive
Oct 15, 2021 Geoffrey Ferguson (gferguson0731)
data

eye 0

favorite 0

comment 0

This is a take on a Sci-Fi blaster meant to merge SW aesthetics with modern era gun manufacture. This prop takes some queue's from existing SW props, but is meant to be unique and original. Prop prints in 4 pieces (upper, lower, trigger, (2) trigger pins). The upper and lower receivers slide together, and the trigger is designed to be functional by stringing rubber band from trigger around rear pin. Files are oriented in "ideal" position (printing upward) due to the rails which model...
Topics: thingiverse, costume_prop, stl, Props, space, cosplay, blaster, starwars, star_wars, prop,...
Thingiverse Archive
Oct 15, 2021 jack tim (OkThen)
data

eye 0

favorite 0

comment 0

so these are my two adventure time figures. i recommend printing Jake upside down, this should make the arms come out better. check out the video: https://youtu.be/1ZhY8unP7F0
Topics: thingiverse, stl, Finn, Adventure_Time, Sculptures, Jake_the_dog, jake
Thingiverse Archive
Oct 15, 2021 Brian Bulkowski (bbulkow)
data

eye 2

favorite 0

comment 0

I designed this S18 stand to be printed in one piece. It should fit most smaller printers, with a Z height of just under 195mm, and about 180x180 on the bottom. One piece is very good because there's a lot of strain laterally as you're putting the wheel in, and the right angle that gets created with a three-part-and-bolts design isn't very stable. I've also shortened the "arms" that the wheel sits on. This seems helpful because you tend to aim for the arms. I've also put the wheel on...
Topics: Hobby, thingiverse, Kingsong, stl, EUC, kingsong_s18, Kingsong_ks_s18
Thingiverse Archive
Oct 15, 2021 Steve Herriford (ResinchemTech)
data

eye 0

favorite 0

comment 0

This is the enclosure I used for the D1 Mini and photoresistor for my Home Assistant Dryer notifications. See [Washer and Dryer Notifications for Home Assistant](https://youtu.be/0dc82m7IAM4) for full assembly and use details.
Topics: stl, Electronics, thingiverse
Thingiverse Archive
Oct 15, 2021 Krzysztof Gliniecki (Chris_PL)
data

eye 0

favorite 0

comment 0

Small push-in rocker switches: 14mm x 9mm.
Topics: stl, 3D Printer Accessories, thingiverse
Thingiverse Archive
Oct 15, 2021 Micah Rojas (partypickle101)
data

eye 0

favorite 0

comment 0

Here's my stone holders that ive designed for us guided sharpener users, and uploaded for your personal use. Please let me know what you think of it. I have some 3x2mm round recessed holes in the lid, and body of the enclosed model for small disc magnets. Note: You might have to lightly sand the edges of the lid to make it fit to your preference.
Topics: Knife_Sharpener, thingiverse, stl, whetstone_box, sharpening, sharpener, Tool Holders & Boxes
Thingiverse Archive
Oct 15, 2021 Alex Kutka (AlexK_121)
data

eye 0

favorite 0

comment 0

Just zip tie it to your dog leash and never have to carry the poop bag in your hand. Two bag clips for those dogs that poop a lot on walks. Can enlarge it to carry more than one on each side and increase durability.
Topics: stl, thingiverse, Gadgets
Thingiverse Archive
Oct 15, 2021 moldy Bread (ScaryoHysterio)
data

eye 0

favorite 0

comment 0

i made a tik tok that i made some jawbone earrings and somebody wanted the files so here they are!
Topics: stl, thingiverse, Costume
Thingiverse Archive
Oct 15, 2021 M (KimbletheDwarf)
data

eye 0

favorite 0

comment 0

Just some Feather seals for my Native American themed Marines. Can't remember where the heck I got the seals, please message me if you recognize them!
Topics: stl, thingiverse, Models
Thingiverse Archive
Oct 15, 2021 jeremy adams (jadams19)
data

eye 0

favorite 0

comment 0

universal Io shield for a 1u rack mount case . needed this for a iStarUSA D-118V2-ITX case but should work in most all 1u cases
Topics: stl, thingiverse, Computer
Thingiverse Archive
Oct 15, 2021 Kyle Hensley (Kyle_Hensley)
data

eye 0

favorite 0

comment 0

WORK IN PROGRESS Tips are appreciated! Dogecoin address: DSfAqQ1mBXngnwPSXKJcRcockx51WDFFgK
Topics: thingiverse, stl, desktop_stand, pliers_stand, organizer, pliers_holder, Desktop_Organizer, Tool...
Thingiverse Archive
Oct 15, 2021 Brennan Thomason (spelchek)
data

eye 1

favorite 0

comment 0

This is a bookmark/tool combo that I designed to put in a notebook I use for 3D printing notes and ideas. WARNING: It does have a tendency to slightly bend the top edges of whatever page it's on if you use the clip at the top. I don't personally mind, but if you like those super crisp edges, you may want something a little thinner or of a slightly different design.
Topics: stl, Engineering, thingiverse
Thingiverse Archive
Oct 15, 2021 Michael Hoskins (no1453)
data

eye 0

favorite 0

comment 0

I needed some practice designing, so I modeled this semi-famous vaporizer model. It has six parts, the glass parts (2) should be printed in transparent filament for the best effect. A bit of warning, this was designed with precise tolerances, so you might want to print the glass parts a little big, and the heater stick a little small (say 102% and 98%). The knob pin probably needs to be slightly smaller, too. (Maybe 99%?) I included an STL of the whole thing assembled, and one STL that allows...
Topics: thingiverse, stl, vaporizer, Props, model, silver_surfer
Thingiverse Archive
Oct 15, 2021 Brennan Lagan (Brennan329)
data

eye 0

favorite 0

comment 0

Desk riser
Topics: stl, Office, thingiverse
Thingiverse Archive
Oct 15, 2021 Tim Petro (StuffandThingies)
data

eye 0

favorite 0

comment 0

Remixed for the right APL font
Topics: thingiverse, stl, Fashion, HID, badge, APL
Thingiverse Archive
Oct 15, 2021 kevin sterner (BeanBurritoBetrayal)
data

eye 0

favorite 0

comment 0

Designed in Tinkercad. For vintage Radio Shack RC Sherman Tanks missing the barrel.
Topics: thingiverse, vintage_toy, stl, Toys & Games, WW2_tank, RC_Car
Thingiverse Archive
Oct 15, 2021 Richard Nguyen (laetic)
data

eye 0

favorite 0

comment 0

Just made a very quick car plug socket. I needed something to step down my 12V solar batteries to charge my ipad etc. I had a car charger lying around so why not use that. Check your car plug before printing: socket ID: 20mm, depth: 33mm. https://en.wikipedia.org/wiki/Automobile_auxiliary_power_outlet Post printing: The pin at the end is 12V/24V input and the sides are GND. I stuck two wires into the holes in the sides of the socket and put foil tape on the inside to hold them in place. Make...
Topics: stl, Electronics, thingiverse
Thingiverse Archive
Oct 15, 2021 Jay Warnick (jdollars)
data

eye 0

favorite 0

comment 0

Remix, using M3 hardware
Topics: stl, thingiverse, Toy & Game Accessories
Thingiverse Archive
Oct 15, 2021 Paulo Arthur Castilho (pacastilhobr)
data

eye 0

favorite 0

comment 0

Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset. Letter embossing doesn't need it. Spade - Infil to add weight, no supports Letters - Print flat, already scaled to fit nicely in the embossing Star - Infil to add weight. Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight. Glue in...
Topics: clock_hands, thingiverse, hands, stl, wall_clock_parts, mickey_mouse, wall_clock, Replacement Parts
Thingiverse Archive
Oct 15, 2021 Nicholas Sieber (SkinlessNoodle)
data

eye 0

favorite 0

comment 0

Any printer, any filament. size is 57mm long, 19 wide. can be resized in slicer. ty :D
Topics: thingiverse, belt, Costume, stl, ammo, blaster, Mandolorian, mando, star wars
Thingiverse Archive
Oct 15, 2021 philip guimond (phil_347)
data

eye 0

favorite 0

comment 0

Updated version of the original bike helmet holder. Made the edges taller, because helmets tend to fall. Also added 10mm to the plateform to accomodate more helmets type.
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Oct 15, 2021 I'm not giving you my real name (stlMitch)
data

eye 1

favorite 0

comment 0

[Tank Cat] Tough. High health. (Area Attack) Strong enough to move a pebble. ~ The Battle Cats Cat Guide ----------------------------------------------------- This is a model of the Tank Cat, one of the normal units of the game The Battle Cats by Ponos. btw I don't have much experience in designing, I just made this in Tinkercad, so I will happily make adjustments to the model ------------------------------------------------------ I'm not sure if I should put in any legal stuff so I'm just...
Topics: stl, thingiverse, Models
Thingiverse Archive
Oct 15, 2021 Nathan Eberlin (natdoggy2)
data

eye 0

favorite 0

comment 0

Feet for sink grate. I have an elkay branded one but should fit many. Have weep holes to allow water to seep through, also helps with cleaning. I printed mine in TPU. Requires no supports.
Topics: Kitchen & Dining, Sink, thingiverse, Rubber Feet, stl, Strainer, Kitchen, Feet, Grate
Thingiverse Archive
Oct 15, 2021 Miguel Rusch (Mig86)
data

eye 0

favorite 0

comment 0

This is a mount to suit the OFT V2. It is compatible with the RAM mounting system (1" Ball). Open type hinge to allow front and rear to be printed separately. Just use a rubber band to hold frame closed as per picture. Printed on my Ender 6.
Topics: stl, Automotive, thingiverse
Thingiverse Archive
Oct 15, 2021 Jonathan B. Ott (Jonathan_Ott)
data

eye 0

favorite 0

comment 0

Quick miter box to cut(with something like an X-Acto razor saw) aileron stock to the correct angle to match the sweep of an FPVWRA Spec Wing.
Topics: thingiverse, stl, 3D Printing, aileron, miter_box, Race_Spec_Wing, spec_wing
Thingiverse Archive
Oct 15, 2021 J.D. Sharp (Leadtech5)
data

eye 0

favorite 0

comment 0

Wanted to put the Shark Byte TX5S.1 in the Five33 Switchback Pro.. So I did. Pictured is my proof of concept top-plate. The files have cutouts like the OEM top plate so most accessories should fit the same. - This is cut from 2mm carbon sheet - Stack screws must be cut or replaced with 20mm screws (tip to tail)! - The board is held to the top plate by m2x7mm motor screws, m2 nuts, and 2-3mm gummies. - The 40mm MIPI Cable would be best ->...
Topics: R/C Vehicles, sharkbyte_TX5S1, fpv, drone_racing, vtx, sharkbyte, QuadRivals, fatshark, fpv_racing,...
Thingiverse Archive
Oct 15, 2021 Julian jj (joomax)
data

eye 0

favorite 0

comment 0

fan spacer useful for deshrouded GPUs if mounting fans to the case instead of zip-tieing to the GPU heatsink.
Topics: stl, thingiverse, Computer
Thingiverse Archive
Oct 15, 2021 Aaron McKay (ajmckay)
data

eye 0

favorite 0

comment 0

Simple wall mount for an EGO 56v battery. It could also be mounted under a shelf. This was remixed from the Minimalist EGO battery holder by BoredCAD. I made it a bit longer to better support heavier mAh capacities. I also added bevels to the top edge to make sliding the battery on easier. Finally, I made it about 3mm taller so the battery doesn't touch the wall and make marks. Being taller it also fits walls that aren't flat. This is a mid-size battery holder. It took 4 hours to print which...
Topics: stl, thingiverse, Tool Holders & Boxes
Thingiverse Archive
Oct 15, 2021 novakane (novakane)
data

eye 0

favorite 0

comment 0

These are some round sanding blocks useful for sanding inside curves on guitars. The sandpaper gets tucked into the slot, wrapped around the holder and then you push both ends inwards together until it's taught. There is space for the sandpaper to curl up in if you didn't trim it short enough so I recommend trimming your paper a bit longer than you think you need it to be to be safe. I used some peel and stick neoprene rubber to provide some padding.
Topics: luthier, thingiverse, stl, sanding_block, sanding_tool, Hand Tools, luthier_tool, hand_sanding_tools
Thingiverse Archive
Oct 15, 2021 Christian King (chking)
data

eye 0

favorite 0

comment 0

A wall mount for the Bosch BC330 Battery Charger (https://www.amazon.com/Bosch-BC330-12-volt-Lithium-Ion-Battery/dp/B00EPE7QU4). I've also designed a Slat Wall plate for this mount: https://www.thingiverse.com/thing:4968524
Topics: stl, thingiverse, Household, wall_mount
Thingiverse Archive
Oct 15, 2021 chris bass (WW2Chris)
data

eye 1

favorite 0

comment 0

This is a remix of https://www.thingiverse.com/thing:2936367 With luck this is closer to a WW2 grenade, it will fit a real postwar head or print the head from the original https://www.thingiverse.com/thing:2936367
Topics: thingiverse, stl, reenactment, Sport & Outdoors, Grenade, WWII, US_ARMY, WW2
Thingiverse Archive
Oct 15, 2021 Chris Teal (DroneCOproductions)
data

eye 0

favorite 0

comment 0

Full protection while still giving you acces to rear screen or leave support in if you want the protection hero 9 and hero 10
Topics: thingiverse, ndfilter, stl, Gopro_ndfilter, Other, gopro, flaps
Thingiverse Archive
Oct 15, 2021 Jacky Chan (sevenc426)
data

eye 0

favorite 0

comment 0

Suitable for N scale cow field. Designed in TinkerCAD just about an hour according to pictures I found from google. Not intended to print in larger scale as I just make it in a rough sketches with no details. Hand painted with acrylic paint and assembled with PVA glue. Enjoy and have fun!
Topics: Spur_N, thingiverse, stl, farm, Buildings & Structures, cow, shelter
Thingiverse Archive
Oct 15, 2021 (cris11368)
data

eye 0

favorite 0

comment 0

Simple cheap sensor form ali, not linking the actual product link but I have included an image from the product page so you can get an idea of what I'm using. Worked for me with alex's firmware out of the box.
Topics: stl, 3D Printer Accessories, thingiverse, filament_sensor_mount
Thingiverse Archive
Oct 15, 2021 Igor Slonina (islonina)
data

eye 0

favorite 0

comment 0

Remix for 8x4 neodymium magnets made by MrEverlost https://www.thingiverse.com/thing:4522643
Topics: stl, thingiverse, Video Games
Thingiverse Archive
Oct 15, 2021 ken thorn (kenbob904)
data

eye 0

favorite 0

comment 0

made this by taking the head off the cute mini benderopus and putting frys head on head is hollow with a hole for sla printing may work on fdm as well
Topics: stl, Creatures, thingiverse
Thingiverse Archive
Oct 15, 2021 Neil O'Rourke (Noro71)
data

eye 0

favorite 0

comment 0

Cheek riser specifically designed for the HK G3, more specifically for the clone by PTR, the PTR-91. Fits the standard size buttstock. Two holes in the riser align with two holes in the buttstock that are originally used for retaining the takedown pins during field stripping. You can use whatever methods you wish to secure the riser- nuts and bolts, clevis pins, etc.
Topics: rifle, thingiverse, stl, PTR91, airsoft, Machine Tools, cheek_riser
Thingiverse Archive
Oct 15, 2021 Patricia Dawson (Patricia68)
data

eye 0

favorite 0

comment 0

This is a spool holder that lets you keep the door on your FlashForge Adventurer 3 without making any modifications to the machine for printing external filament. All of the other designs are hours and hours, tons of wasted plastic and you have to keep the door off. Prints in 39 minutes. Super minimal design.... did I mention you can keep your door on? I would like to add two little tiny filament guides for running the filament through the inside that can handle just raw filament or to hold a...
Topics: stl, Creatures, thingiverse
Thingiverse Archive
Oct 15, 2021 Esteban Adra (Esteban16899)
data

eye 0

favorite 0

comment 0

Remixed DGFT Paddles from https://www.thingiverse.com/thing:1872428 to use in https://www.thingiverse.com/thing:1359631/files All attribution goes to the previous mentioned designers, I only cut pasted the models for ease of print. Hope it's useful for some of you! Tnx!
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Oct 15, 2021 Jake Boze (BozeCreations)
data

eye 0

favorite 0

comment 0

I needed a simple mount for my Surface Pro 3 to use as a GRBL Controller for my CNC Mill, so I designed this and want to share it in case you are needing the same thing or something similar WILL FIT ANY TABLET 11MM THICK, PLEASE MESSAGE ME IF YOU NEED A DIFFERENT SIZE OR REMIX THIS ONE I designed this in inventor PRINT 2 AND SCREW TO THE WALL I HAD BEST PRINTING STANDING THEM UP WITH NO SUPPORTS, YES IT TAKES LONGER TO PRINT HOWEVER IN MY EXPERIENCE MUCH BETTER QUALITY
Topics: stl, thingiverse, Computer
Thingiverse Archive
Oct 15, 2021 Electro nautic (Electronautic)
data

eye 0

favorite 0

comment 0

3D PRINTED DIY CORSAIR ST100 PREMIUM RGB HEADPHONE STAND Video link -https://youtu.be/4w2gKFBPeSs
Topics: thingiverse, rgb, stl, 3D Printing, Headphone_stand, ST1000, headphone_holder
Thingiverse Archive
Oct 15, 2021 Dustin Range (Treeific)
data

eye 0

favorite 0

comment 0

I remixed the original to fit 8x2 magnets. (the original called for 8x3) I used the 8x3 for a while, but noticed the magnet would slowly move, allowing two plates to touch flush. Which prevents any anti wobble action.
Topics: thingiverse, decoupler, stl, Z axis, z wobble, anti wobble, 3D Printer Parts
Thingiverse Archive
Oct 15, 2021 Nick LoPiccolo (ncloven)
data

eye 0

favorite 0

comment 0

Made this so the Bath and Body Works Soap Dispenser could have a little more Pizzaz! Plus, mine doesn't rust. https://www.etsy.com/shop/PRINTSTANT3D?ref=seller-platform-mcnav I hope you guys enjoy this.
Topics: stl, Bathroom, thingiverse
Thingiverse Archive
Oct 15, 2021 Miguel Hidalgo (DevilDogDotGames)
data

eye 0

favorite 0

comment 0

This is version 3 of the chassis Jig. This jig is similar to Ver 2 but is scaled down to fit with the frame rails from the Ver 1 jig.
Topics: modeling, Hobby, thingiverse, Drag Racing, stl, Chassis, scale_model
Thingiverse Archive
Oct 15, 2021 Jacob Jin (Gargoles)
data

eye 0

favorite 0

comment 0

Replacement for bracket that attaches hose to bike pump Printing: 100% fill, no supports or raft needed For scaling, this one's designed for 32mm diameter pump chamber and 10mm diameter hose. Model is 7.2mm high and thick. Tested w/PLA+ to verify flexible enough to snap over pump chamber Tip: Wrap a zip tie in rubber from old bike tube and wrap attach it under bracket to hold more firmly. Fine without but a little better with. And now that I think about it, you could just just zip tie the hose...
Topics: stl, thingiverse, Sport & Outdoors, bicycle_pump_mount
Thingiverse Archive
Oct 15, 2021 Pep3Design (Pep3Design)
data

eye 0

favorite 0

comment 0

Simple combi tool (spacer holder and wrench) for quicker and easier application of the “Nylock Mod” on a Prusa I3 MK3S/MK3S+. One end of the tool can be used as a wrench to turn the nylock nuts. The other end contains an 6mm socket where you can press in one original spacer of your heating bed. Therefore you get an exact measuring spacer tool for the first leveling before you start the nylock mod leveling software. Since the tool is not magnetic, it is much easier to handle than this...
Topics: thingiverse, bed, stl, 3D Printer Accessories, mk3s, bed_leveling, prusa, tabletop, nylock_mod,...
Thingiverse Archive
Oct 15, 2021 Nick LoPiccolo (ncloven)
data

eye 0

favorite 0

comment 0

Made this so the Bath and Body Works Soap Dispenser could have a little more Pizzaz! Plus, mine doesn't rust. https://www.etsy.com/shop/PRINTSTANT3D?ref=seller-platform-mcnav
Topics: stl, Bathroom, thingiverse
Thingiverse Archive
Oct 15, 2021 kevin jespersen (haxzor333)
data

eye 0

favorite 0

comment 0

my friend was missing the knobs to his window cranks in his trunk so i made these based off the measurements he gave me and printed 2 of them and he said they fit good i printed these in PLA rotate model so hole is on print bed
Topics: stl, Automotive, thingiverse
Thingiverse Archive
Oct 15, 2021 Devin Cress (yeetthemedic)
data

eye 0

favorite 0

comment 0

Just a quick solder dispenser I threw together. Add rubberized feet to prevent it from sliding. Maximum Spool Sizes ------------------------------ - Large spool: 70mm diameter, 63mm wide - Small spool: 70mm diameter, 35mm wide Spool arbor diameter must be less than 18mm.
Topics: solder, thingiverse, spool_holder, dispenser, stl, electronics, Electronics, solder_spool,...
Thingiverse Archive
Oct 15, 2021 Mason Arens (Masonarens)
data

eye 0

favorite 0

comment 0

Replacement choke cap for Honda NC50 Express 1980 model. Its not exactly like the original, but works for me.
Topics: stl, Automotive, thingiverse
Thingiverse Archive
Oct 15, 2021 Robert Bickford (DPs_Designs)
data

eye 0

favorite 0

comment 0

This is a simple puzzle cube to test yours or your friends minds. It starts off as a long snake of cube and you need to manipulate them to become a 3x3 square cube. Just need a 3mm X 560mm piece of elastic cord to attach all the parts together. Note: I added a half end cube STL that you can use for a test print to check how well the holes come out beforehand. Then you can make any print adjustments if needed in your slicer. PRINTING: Position: Print as shown. Material: Doesn't mater, but should...
Topics: cube, thingiverse, stl, Puzzle_Box, Puzzles, 3D_puzzle, cube_puzzle, puzzle
Thingiverse Archive
Oct 15, 2021 Max Leeming (Max8894)
data

eye 0

favorite 0

comment 0

In my house we have a slot in Key holder; Being a forgetful person I often misplace my Lanyard - So I decided to 3D print a Lanyard holder designed to slot into its 2mm insets!
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Oct 15, 2021 Kian Dutkiewicz (nubkid)
data

eye 0

favorite 0

comment 0

A simple keychain with the YETI logo. Very easy print.
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Oct 15, 2021 omari robinson (datbwoyomari)
data

eye 0

favorite 0

comment 0

This is a wall hook i designed for snap back hats. It mounts in Dry wall using a standard thumb tack. it measures 30mm by 13mm by 30mm
Topics: stl, Accessories, thingiverse
Thingiverse Archive
Oct 15, 2021 Tsukuru Hyakutake (creator_Hyaku)
data

eye 0

favorite 0

comment 0

After outputting the base to the bar, assemble it with adhesive. I expected him to get in the bar and eat, but he went sideways and ate. It is the output of the bar, but if you stand it up, it will break more easily as you go up. It seems to be beautifully finished to output with a support in landscape orientation. When I first output the base, the support of the base broke, so I output the support of the broken end later and connected it to the broken end. The tip at this time is also listed...
Topics: stl, thingiverse, Pets
Thingiverse Archive
Oct 15, 2021 Nick LoPiccolo (ncloven)
data

eye 0

favorite 0

comment 0

Made this so the Bath and Body Works Soap Dispenser could have a little more Pizzaz! Plus, mine doesn't rust. https://www.etsy.com/shop/PRINTSTANT3D?ref=seller-platform-mcnav
Topics: stl, Bathroom, thingiverse
Thingiverse Archive
Oct 15, 2021 Forward Phone (forwardobi)
data

eye 0

favorite 0

comment 0

This is the pin that holds the wooden switch panel in the center console to the car. The plastic pin is often broken in the old Mercedes W123 cars. I've gotten PLA to work on parts in this area of the car. I believe they anneal over time and the glass transition temperature goes up. To strengthen the pin, I made a hole down the shaft that fits a standard construction nail. Cut off a nail, coat it with your favorite epoxy and glue it into the hole for extra strength. I use gorilla clear urethane...
Topics: stl, Automotive, thingiverse
Thingiverse Archive
Oct 15, 2021 Taleya Joinson (Taleya)
data

eye 0

favorite 0

comment 0

Basic storage block for a Matador pizza stone cleaning brush. Narrowed in so it sits quite nicely and won't come loose, but is easily removed to use the brush. Keeps it nice and neat in the cupboard and not biting everyone.
Topics: Kitchen & Dining, thingiverse, pizza, stl, matador
Thingiverse Archive
Oct 15, 2021 William Gates (William_Gates)
data

eye 0

favorite 0

comment 0

klaus schwab is a skeleton he wants to cause a great reset on your life climbing out of grave "Dr" Fauci thinks he is in charge riding the puppeteer but he is told what to do satan is the ring on the puppet master hand graphine oxide nanogel on back all seeing eye american flag NWO logo
Topics: stl, 3D Printing Tests, thingiverse
Thingiverse Archive
Oct 15, 2021 Tobias Aufschläger (tob_yyyeet)
data

eye 0

favorite 0

comment 0

Für die kleinen Schulanfänger
Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Oct 15, 2021 Jeff Ba (jumbledbyte)
data

eye 0

favorite 0

comment 0

We needed a place to keep our small (ok, not that small) collection of Nintendo Switch game cards. Why buy one when you can make one, right? This is a simple case with a "twist". Once fully assembled it should appear to be a 3d printed minecraft block, however depress a "hidden" (in plain-sight) button and the top will lift up. With a simple twist the top can be lifted up providing access to 14 game chips. Give the top one more twist and the top comes free revealing a small...
Topics: Game_Card_Case, thingiverse, stl, Minecraft, minecraft_block, Toy & Game Accessories,...
Thingiverse Archive
Oct 15, 2021 Brett Flowers (Bflowers17)
data

eye 0

favorite 0

comment 0

Hello All, I threw this design together to help me carry all my essentials when going out. I call this little guy the 8 J holding bay. As the name states it will hold 8 of your herbal cigarettes ;) I printed this on the newest model of the prusa mini with generic filament from Amazon on .2mm quality settings. This was printed with the lid flat on the bed and the case on its side with the closed end of the slot facing down and required no supports The lid should be snug once fulling inserted but...
Topics: stl, thingiverse, Gadgets
Thingiverse Archive
Oct 15, 2021 Wicus Botha (WicBo)
data

eye 0

favorite 0

comment 0

Here is a GREAT Egyptian Cosplay Set to wear at any party or with any basic Egyptian Costume. These accessories are fun to add that wow factor to amaze friends and family. The set has anything and everything for a adult cosplay fanatic. There are rings, amulets, bracelets, medallions, earrings, necklaces, etc etc for both genders. So bring out the Pharaoh or Cleopatra in you...be the King or Queen of the Nile. When I did these I tried to capture Ancient Egyptian designs, there are a bit of...
Topics: stl, Accessories, thingiverse
Thingiverse Archive
Oct 15, 2021 Jacob Marble (McSpicy)
data

eye 0

favorite 0

comment 0

I recommend printing solid, it's a small part so better strength is better and won't cost you much. I found that commercial equivalents didn't offer enough flexibility, so I made my own mount. It's not been tested for long term use, so use at your own risk. That said, it should be fine.
Topics: thingiverse, pump, water, stl, mount, fan, Electronics, revo, EKWB
Thingiverse Archive
Oct 15, 2021 Carlo (carlg00)
data

eye 0

favorite 0

comment 0

It's a "fast" to print (sub 40min) filament guide inspired by the famous filament roller thing, but instead I use a groove bearing. So, I used: - M4x8 Screw - M4 Shim - M4 Nut Insert - Groove Bearing (I think U604ZZ, however the one that came with the Ender3) Just insert the Nut Insert in the hole, then tighten up (not so much) the screw and you are good to go.
Topics: filament, thingiverse, filament_guide, creality_ender_3, tool, filament_roller, stl, 3D Printer...
Thingiverse Archive
Oct 15, 2021 Nick LoPiccolo (ncloven)
data

eye 0

favorite 0

comment 0

This is a Remix of jgr526's file. The grip bits were separated and made slightly smaller for a pressure fit. I also BEEFED up the portion that covers the front of the joycon as the original kept breaking. This has a gloriously tight fit that allows for the most extended of plays without worrying that your switch will fly out of the holder. If you would like to support me, please purchase from my Etsy. This listing coming soon. Only the right side is listed here. Mirror in your slicer. Also, you...
Topics: stl, thingiverse, Video Games
Thingiverse Archive
Oct 15, 2021 Mike Pp (Apotatachip)
data

eye 0

favorite 0

comment 0

Made to fit a socket i had that was the right size for taking the nozzle in and out. its 1/4 in drive and has an inset again designed for my socket some remixing may be needed for other sockets I'm not sure. Just a straight forward adapter to allow me to get some grip on the socket there is no torque mechanism or anything. No supports needed
Topics: thingiverse, nozzle, stl, socket, wrench, Hand Tools, socket_wrench
Thingiverse Archive
Oct 15, 2021 Sebastian Whiskey (SeabassDesigns)
data

eye 0

favorite 0

comment 0

New Borpa just dropped. A 3D-printable version of the BetterTwitchTv Emote known as Borpa. I could not find a plain version of Borpa but I found a modified one on Sketchfab here: https://sketchfab.com/3d-models/borpasaur-145a46a234d64bf3934be1c40748a6d7 Which I then brought into my software, deleted the bulbasaur back, cut the bottom 2mm so you get a flat bottom, and exported.
Topics: thingiverse, Emote, stl, BTTV, BBTV, Borpa, 3D Borpa, Art
Thingiverse Archive
Oct 15, 2021 Christian King (chking)
data

eye 0

favorite 0

comment 0

A wall mount for the BOSCH 12V Max BAT414/GBA12V30 battery (https://www.amazon.com/Bosch-12V-Lithium-Ion-Battery-GBA12V30/dp/B079NWHSCS). I've also designed a Slat Wall plate for this mount: https://www.thingiverse.com/thing:4968518 Bill of Materials 3x M4 8mm or 10mm screws Remixed From Bosch 12v Battery Mount.stl - https://grabcad.com/library/bosch-professional-12v-battery-wall-holder-1
Topics: stl, thingiverse, Household, battery_holder
Thingiverse Archive
Oct 15, 2021 Jimmy Zimmerman (Jimmyzimms)
data

eye 0

favorite 0

comment 0

Reposting since these got nuked at some point from Grandma Wendy. Don't remember where I got the parts for these from so give me a ping if you recognize your bitz so I can credit you.
Topics: thingiverse, stl, epic_scale, epic40k, Games
Thingiverse Archive
Oct 15, 2021 Sami Fauzan Ramadhan (sami17001)
data

eye 0

favorite 0

comment 0

This is a minimal mounting for Raspberry Pi 4B attached to RPLiDAR A1M8. I'm successfully printed it using my Ender 3 V2 using PLA and standard 0.4mm nozzle Prints relatively fast, around 2-3 hours, and the LiDAR attached very easily. It's not intended to be used in a flipped position Let me know if you use my design, please! I hope you guys enjoy this.
Topics: thingiverse, Robotics, stl, mount, RPLidar, Raspberry_Pi, lidar
Thingiverse Archive
Oct 15, 2021 Carlos Plaza Aguilera (carlosplazaaguilera)
data

eye 0

favorite 0

comment 0

The original pieces was in ABS and destroyed by the Sun. This are made in white PETG and adapted for the new lights which include a black base. Carlos Plaza Aguilera. July 2021.
Topics: Automotive, thingiverse, stl, caravana, g&aacute, libo, Front, 435L, LUZ, lights, Roller,...
Thingiverse Archive
Oct 15, 2021 Jason M (Jason535)
data

eye 0

favorite 0

comment 0

Bullet Bill wall art
Topics: home, game, super_mario_bros, games, art, Video_games, gaming, mario, video_game, videogame, wall,...
Thingiverse Archive
Oct 15, 2021 William Gates (William_Gates)
data

eye 0

favorite 0

comment 0

dodge ram seat belt clip
Topics: stl, 3D Printing Tests, thingiverse
Thingiverse Archive
Oct 15, 2021 Mr Bailey (AlwaysTinkering)
data

eye 0

favorite 0

comment 0

Garden Hose Pool Jet Syphon adapter This accelerates your syphon flow from the pool... Depending on the pressure it likely drain slightly higher elevation than your draw. Attach to the end of your garden hose and latch in front of one of the pool water jets. It prints for a 22mm open jet. It does not divert all the water from the jet as that may be difficult to do with a clamp in attachment. The pump is likely putting out more pressure and GPM than the clamp could hold back. It uses the...
Topics: syphon, pool, thingiverse, Outdoor & Garden, drain, stl, hot tub, spa
Thingiverse Archive
Oct 15, 2021 (Dovraga)
data

eye 0

favorite 0

comment 0

Cup Noodle Birds 2: The Flock Pecks Back I wanted to update the original project and make it easier to print, require fewer screws, and be more glue friendly. Original: https://www.thingiverse.com/thing:4947855 Changes: - Split the main body into two halves, reducing the support material required and a bit easier on the printer and print time. - Created a "smooth" body without a logo. - Revamped the "long chopsticks" top. The top no longer requires screws; instead, the...
Topics: perch, Cup_noodles, thingiverse, birdbath, Hobby, stl, Birds, ramen, birdhouse, cup_noodle, Nissin,...
Thingiverse Archive
Oct 15, 2021 joshua butler (onintothevalleyofdeathroadthe600)
data

eye 0

favorite 0

comment 0

Just decided to tinker around with the model. 1:100 scale originally came from guaro3d's Easy to print Fouga Magister https://www.thingiverse.com/thing:2274507 Lore the Twin Fouga was originally produced as a personal project of several retired pilots and engineers who posted the refitting process online as it happened. This was largely harmless until several others realized that the extra fuselage could easily be modified for onboard radar with the second trainee seat being modified as a...
Topics: thingiverse, plane, stl, Vehicles, airplane
Thingiverse Archive
Oct 15, 2021 Rodrigo Bragion (Bragion)
data

eye 0

favorite 0

comment 0

Simple keychain with the map of italy. You can choose any color filament. Prints easy and fast. Enjoy!
Topics: Italy, thingiverse, stl, Keychain, Keychains
Thingiverse Archive
Oct 15, 2021 Aiman Anuar (aimanesums)
data

eye 0

favorite 0

comment 0

Remix of clypp's design (https://www.thingiverse.com/thing:4315674) Used for the Blue Snowball iCE microphone, particularly for the models where you can't screw off the stand. This revision makes it so the parts wrap around the stand. Previously, you had to slide the inner component onto the mic, which is impossible if you can't take off the stand. You need 5 hairbands or rubberbands to create the suspension on the shock mount and you need an arm for the shock mount to attach to.
Topics: stl, Audio, thingiverse
Thingiverse Archive
Oct 15, 2021 David Tucker (reality_boy)
data

eye 0

favorite 0

comment 0

This is a mostly 3D printed rotary axis for a cnc machine. I made it to use with my [MultiBot CNC machine](https://www.thingiverse.com/thing:4645791) but it would work with any machine that can accept a NEMA 17 stepper motor. It uses a pair of 3D printed gears and a 200 mm toothed timing belt to get a 3:1 reduction on the stepper motor. This increases the torque and resolution with minimal backlash. A pair of ball bearings support the shaft, and for now I am using an off the shelf 2" 3 jaw...
Topics: 4th_axis, diy_dremel_cnc, cnc_mill, 3D_Printed_CNC, 3d_printed, CNC_Machine, cnc, lathe, rotary,...
Thingiverse Archive
Oct 15, 2021 Chris Teal (DroneCOproductions)
data

eye 0

favorite 0

comment 0

5" Cinewhoop Parts from Drone CO Productions
Topics: caller, thingiverse, stl, Other, shot, shotcaller
Thingiverse Archive
Oct 15, 2021 Daniel Fowler (Dingo89)
data

eye 0

favorite 0

comment 0

My first ever 3D Modelling attempt. I needed an adapter that was easy to remove for the exhaust fan on my PC as we come in to the hotter months. This is going to be attached to a portable air-conditioner hose, and to the window plate to help exhaust hot air from the PC outside rather than heat up our small room. I designed this in Fusion360 and have included the STEP file for anyone who wants to remix. Hose ordered is 130mm inner diameter, but this should work fine with the bead on it (goes out...
Topics: adapter, thingiverse, Computer, stl, 120mm, computer_fan, magnetic, computer, 120mm_fan, fan,...
Thingiverse Archive
Oct 15, 2021 Rob Sweet (robsweet)
data

eye 0

favorite 0

comment 0

I have a Dremel Flexi-Shaft and wanted to use the Dremel safety shield with it but the shield is threaded for the full-sized Dremel body threads, not the Flexi-Shaft. I'm just starting with 3D printing and this is my first design so I ended up finding existing STLs with each of the two threads that I needed and using Meshmixer to turn those into one adapter part. If more experienced folks have suggestions for improving the piece, I'm all ears.
Topics: adapter, Dremel_Accessories, thingiverse, stl, Dremel_attachment, dremel, threaded, Parts
Thingiverse Archive
Oct 15, 2021 Jordan Vin Raviv (jvinraviv)
data

eye 0

favorite 0

comment 0

Pretty simple standoffs designed to fit 40mm square tubing on my desk. I figure a lot of desks are the same so you might find a use for this. The idea was to lift the computer off the carpet to allow better airflow through the power supply. It's pretty simple and works very well.
Topics: stl, Office, thingiverse
Thingiverse Archive
Oct 15, 2021 Michael Callow (Guvna947)
data

eye 0

favorite 0

comment 0

I joined the forward fuselage with the mid and added the guns and adjusted so it would print all in one with no supports or raft. I added alignment posts to join easier.
Topics: Hobby, thingiverse, stl, viper mkII, battlestar galactica
Thingiverse Archive
Oct 15, 2021 Youssef Atigui (Yous3D)
data

eye 0

favorite 0

comment 0

Topics: stl, thingiverse, 3D Printing
Thingiverse Archive
Oct 15, 2021 michelle josph (michellej2018)
data

eye 0

favorite 0

comment 0

one of the 09 concepts for the uss enterprise ncc-1701 redesign
Topics: stl, thingiverse, Star_Trek, Vehicles
Thingiverse Archive
Oct 15, 2021 (Mimmoliquid)
data

eye 0

favorite 0

comment 0

Videogame Shelf Labels Here are some videogame shelf labels you can use on any 2cm wide shelves. The following designs are available at the moment: * Playstation 1 * Playstation 2 * Playstation 3 * Playstation 4 * Playstation 5 - 2021/09/12 * Atari 2600 - 2021/09/12 Available soon: * Sega Game Gear * PSP * Playstation Vita * Nintendo Switch * Nintendo Game Boy ... and more later on. Remember to print the object face down, rotate it into your favorite slicing application. If you have warping...
Topics: playstation, thingiverse, PSVita, gamegear, stl, PS3, ps4, atari2600, Atari, psp, Video Games,...